72 tail pipe tips
Team Owner
Joined: Sep 2006
Posts: 31,273
Likes: 4,366
From: Westminster Maryland
Hi 540,
There's no dimension given in the AIM because there was a small 'kite shaped tab' welded to the top of the pipe coming out of the muffler.
The tip was slid on the pipe until it 'seated' on the tab.
That's why the tips have that odd shaped cut-out in the top of their pipe.
Regards,
Alan
1-1/2" to 2" ?
There's no dimension given in the AIM because there was a small 'kite shaped tab' welded to the top of the pipe coming out of the muffler.
The tip was slid on the pipe until it 'seated' on the tab.
That's why the tips have that odd shaped cut-out in the top of their pipe.
Regards,
Alan
1-1/2" to 2" ?
Last edited by Alan 71; Sep 5, 2017 at 04:09 PM.
