Engine removal/replacement
Thread Starter
Heel & Toe
Joined: Feb 2017
Posts: 22
Likes: 8
Engine removal/replacement
Hi,
Im thinking of installing a crate motor in my 80, do some detailing, etc...
Which is the most preferred method? pull engine, pull engine and transmission together, or pull the body off?
Thanks Much
Chris
Im thinking of installing a crate motor in my 80, do some detailing, etc...
Which is the most preferred method? pull engine, pull engine and transmission together, or pull the body off?
Thanks Much
Chris
Team Owner
Joined: Jan 2006
Posts: 37,637
Likes: 3,118
From: Crossville TN
If you are going to install a crate engine, do the detailing when the engine is OUT. Also detail the new engine, as it will only come with some cheap paint on the block. Whether you pull the transmission or not is your call, depending on if it is manual or auto and on whether the trans/clutch/converter needs any work or not.
Is my vette stock?? HAHA
Joined: Oct 2015
Posts: 20,276
Likes: 9,417
From: Im not allowed to tell you
2020 C3 of the Year Finalist - Modified
2020 Corvette of the Year Finalist (performance mods)
2019 C3 of Year Winner (performance mods)
2016 C3 of Year Finalist
heres an active thread on removal over in the tech section.
https://www.corvetteforum.com/forums...and-trans.html
i repainted my motor and cleaned up the engine compartment with the motor out. very easy when your standing where the engine belongs. I also replaced my heater core while it was out
https://www.corvetteforum.com/forums...and-trans.html
i repainted my motor and cleaned up the engine compartment with the motor out. very easy when your standing where the engine belongs. I also replaced my heater core while it was out
Last edited by Rescue Rogers; Dec 12, 2017 at 06:53 AM.
