Correct paint, '72 A/C compressor?
Thread Starter
Race Director
Joined: Oct 2005
Posts: 12,470
Likes: 1,548
From: Camp Verde AZ
C1 of Year Finalist (performance mods) 2019
2017 C1 of Year Finalist
Correct paint, '72 A/C compressor?
Will the semi flat Krylon 1613 be correct for this, or should it have more gloss to it?
Thanks,
Doug
Thanks,
Doug
Team Owner
Joined: Sep 2006
Posts: 31,272
Likes: 4,364
From: Westminster Maryland
Hi Doug,
I think you're right about the case showing a 'bit' of gloss, but relatively little.
I think I'd still use #1613 but spray it a little wetter which will increase it's gloss a bit.
Be careful though that you don't get too much build up of paint since the cases I look at seem to have a thin coating.
So... a coat or two ....wet.
Regards,
Alan
I think you're right about the case showing a 'bit' of gloss, but relatively little.
I think I'd still use #1613 but spray it a little wetter which will increase it's gloss a bit.
Be careful though that you don't get too much build up of paint since the cases I look at seem to have a thin coating.
So... a coat or two ....wet.
Regards,
Alan
