Header/Sidepipe switch to N14
Thread Starter
Safety Car
Joined: Jun 2000
Posts: 4,711
Likes: 552
From: St. Louis MO
2020 Corvette of the Year (appearance mods)
C2 of Year Winner (appearance mods) 2019
CI 4-5-7-9-10-11 Car Show Winner
CI 2-3-4-5-6-7-9-10-11 Vet
Header/Sidepipe switch to N14
For a long long time I’ve wanted a BLACK ’69 Convertible. Goes back to the early 70’s when a had ’68 427/435 Coupe and spotted a ’69 Triple Black with factory N14 Sidepipe exhaust. Well many many Vettes and other cars later I finally pick one up. Triple Black 350/350, 4 spd, PS, PB, PW, Tilt/Tele and a few other things. Frame off within the past 10 years and begging me to make some mods.
First off is N14 Sidepipes, followed by A/C and not sure after that but have restored Hardtop also waiting to be installed.
The exhaust is complete and starting on A/C but took time out to finish documenting N14 install. I like to document as I seem to forget exactly what it took to do a job.
Here is link to install ===> Click Here
This is not about sound (loud or quiet) or about squeezing out the last ounce of horsepower -- Been-There-Done-That-Stuff -- but what I wanted
George
Starting point
Finished
First off is N14 Sidepipes, followed by A/C and not sure after that but have restored Hardtop also waiting to be installed.
The exhaust is complete and starting on A/C but took time out to finish documenting N14 install. I like to document as I seem to forget exactly what it took to do a job.
Here is link to install ===> Click Here
This is not about sound (loud or quiet) or about squeezing out the last ounce of horsepower -- Been-There-Done-That-Stuff -- but what I wanted
George
Starting point
Finished
