Thread size help
Thread Starter
Racer
Joined: Jun 2008
Posts: 270
Likes: 10
From: Macon Georgia
Thread size help
Looking for the thread size of the machine screws (2 per headlight) that attach the bezel to the bucket. Not the rear screws, but the front screws - one above each lamp. 1969.
Team Owner
Joined: Jan 2006
Posts: 37,637
Likes: 3,118
From: Crossville TN
Be advised that the threaded holes are in aluminum and that little torque should be applied to the screws...if you don't want them to strip. Put a bit of Loctite on each screw and only snug them down by hand. Let the Loctite keep them from backing out.
