engine harness question
Team Owner
Joined: Sep 2006
Posts: 31,202
Likes: 4,287
From: Westminster Maryland
Hi p,
Welcome!
The connector you're holding appears to be for the Combined Emission Control solenoid that's mounted on the front right corner of the carburetor.
Your car may or may not still have this solenoid. (All 71 engines had it originally, both Holley and Q-Jet).
Regards,
Alan
Welcome!
The connector you're holding appears to be for the Combined Emission Control solenoid that's mounted on the front right corner of the carburetor.
Your car may or may not still have this solenoid. (All 71 engines had it originally, both Holley and Q-Jet).
Regards,
Alan
Last edited by Alan 71; Aug 10, 2016 at 01:23 PM.
Team Owner
Joined: Sep 2006
Posts: 31,202
Likes: 4,287
From: Westminster Maryland
Hi p,
I see an aluminum intake, a finned aluminum valve cover, and you add the Holley info… might this 71 have started life as an LT-! ?
That would be nice!
The information on the stamp pad in in front of the driver's side head could hold the answers.
Regards,
Alan
I see an aluminum intake, a finned aluminum valve cover, and you add the Holley info… might this 71 have started life as an LT-! ?
That would be nice!
The information on the stamp pad in in front of the driver's side head could hold the answers.
Regards,
Alan
Last edited by Alan 71; Aug 10, 2016 at 03:21 PM.
Thread Starter
Intermediate
Joined: Aug 2016
Posts: 26
Likes: 15
I wish but no it is just a 270 hp convertible with only power steering as an option. I added the aluminum heads and intake. the valve covers were on it when I bought it.
