thrittle cable alignment
Thread Starter
Racer
Joined: Mar 2015
Posts: 306
Likes: 20
From: Greenville SC
thrittle cable alignment
Hopefully you can see in the pic where I put a new stud on for the throttle cable to attach. The prev. owner had a bubbaized stud and had the throttle and the rod to the cruise control in the wrong places (Swapped positions).
I need to pull the cable out of the bracket a little to get it in alignment with the stud. PROBABLE just a 1/4" or so. The plastic piece holding the cable in the bracket seem too large to slide out or to move at all.
Searched previous threads but could not find answer. Please advice needed.
I need to pull the cable out of the bracket a little to get it in alignment with the stud. PROBABLE just a 1/4" or so. The plastic piece holding the cable in the bracket seem too large to slide out or to move at all.
Searched previous threads but could not find answer. Please advice needed.
Le Mans Master
Joined: Aug 2010
Posts: 5,339
Likes: 546
From: Central Texas
Originally Posted by michaelroy
I could do that but I still wouldn't be able to get the cable out of the bracket?????
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
