1981 vette distributor
Thread Starter
Racer
Joined: Apr 2019
Posts: 300
Likes: 83
1981 vette distributor
I dont think I need to replace my whole dist. but would like to rebuild it, and make the cap red it,s a delco remy so the question where can i buy an exact fit parts kit to do this.
Tech Contributor
Joined: Aug 1999
Posts: 14,370
Likes: 6,364
From: At my Bar drinking and wrenching in Lafayette Colorado
Assuming you do not have an actual ECM-controlled '81 distributor, you can use this:
https://www.summitracing.com/parts/sum-850030/overview/
You don't need a "Corvette-only" shop. There is nothing special about the Corvette HEI - it's a plain ol' Chevy distributor. It's so common and simple that the VW Forum can, in fact, give you the correct advice about it...
Lars
https://www.summitracing.com/parts/sum-850030/overview/
You don't need a "Corvette-only" shop. There is nothing special about the Corvette HEI - it's a plain ol' Chevy distributor. It's so common and simple that the VW Forum can, in fact, give you the correct advice about it...
Lars
Last edited by lars; Nov 27, 2019 at 03:53 PM.
