When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Can anyone recommend an alignment place or person for C3’s? Or has anyone done their own that can provide some insight? I get the basic principles of it just not sure I want to tackle this one but willing to if not too in depth.
Can anyone recommend an alignment place or person for C3’s? Or has anyone done their own that can provide some insight? I get the basic principles of it just not sure I want to tackle this one but willing to if not too in depth.
Can anyone recommend an alignment place or person for C3’s? Or has anyone done their own that can provide some insight? I get the basic principles of it just not sure I want to tackle this one but willing to if not too in depth.
Thanks. Good content from all the replies I have gotten. I really don’t want to go down the diy path (but will if I have to). I found a place in Orlando called Tredalign that shows a forum member endorsed them. Spoke to them today and they said it would cost me $79. For that, I’m ok with not diy. I may give them a shot.
Thanks. Good content from all the replies I have gotten. I really don’t want to go down the diy path (but will if I have to). I found a place in Orlando called Tredalign that shows a forum member endorsed them. Spoke to them today and they said it would cost me $79. For that, I’m ok with not diy. I may give them a shot.
you need to ask them if they also align rear…and if so highly doubt they have the rear shims
They do. And he said he had some shims. I have like 4 or 5 shims on each side now. Can those be reused?
yes and no…theoretically you move from one side to another…the problem is it depends on what’s there ..if thick you cannot make small changes…you need assortment…especially smaller ones