93 dash problem
Melting Slicks
Joined: Feb 2009
Posts: 2,072
Likes: 1
From: Oklahoma City OK
St. Jude '10
Mine would come and go from time to time. Take the dash out (do yourself a favor and drop the steering column first). The dash is not hard just a few screws holding it in. It will unplug from the wire harness, no cable, the whole thing unplugs. All I did was replace the bulbs that backlight the screen. The rest of the bulbs I took out one by one and re-seated them. Then I plugged it back in. It has worked fine ever since. Sounds like your is like mine and just needs to be re-seated or unplugged and replugged. I would start there.
Melting Slicks
Joined: Oct 2007
Posts: 2,310
Likes: 9
From: KB7TIF Ville NV
Then there is the dreaded connectors to the CCM behind the dash or a bad lcd portion of cluster. good luck
Racer
Joined: Aug 2011
Posts: 494
Likes: 138
From: Chesapeake, VA
Melting Slicks
Joined: Oct 2007
Posts: 2,310
Likes: 9
From: KB7TIF Ville NV
Thats not good. its the signal from the ccm or the logic fuse not lcd fuse. still be a loose connection on the connector pictured in the link. Might want to swap out a Known good display to see if its the display.
