code 43 engine stalls on acceleration
Thread Starter
Heel & Toe
Joined: Feb 2005
Posts: 20
Likes: 0
code 43 engine stalls on acceleration
Had trouble getting home and barely made it in the driveway. I replaced the fuel pump and filter. I am getting code 43 which I understand is the knock sensor. Should I be looking for anything else? Car when accelerating still chugs and starts to stall under load. No engine power. Any other tips???
Thank you,
No zoooming for now.
Thank you,
No zoooming for now.
Team Owner
Joined: Oct 2000
Posts: 96,443
Likes: 9
From: Fort Knox, KY
Cruise-In IV Veteran
Cruise-In VI Veteran
Cruise-In VII Veteran
Cruise-In VIII Veteran
What year Vette? Replacing the sensor(s) might correct your problem, but I'd test them first before throwing money at parts. You can rent a knock sensor test tool from NAPA and some AutoZone stores.
Your sensor(s) connector could also be caked with grease, grime or oil and is failing to communicate with the ECM properly.
Your sensor(s) connector could also be caked with grease, grime or oil and is failing to communicate with the ECM properly.
Team Owner
Joined: Jan 2003
Posts: 20,275
Likes: 236
From: Summerland B.C. Canada
This is from my 86, but still maybe useful in diagnosing
http://members.shaw.ca/corvette86/Code%2043.pdf
http://members.shaw.ca/corvette86/Code%2043.pdf
Thread Starter
Heel & Toe
Joined: Feb 2005
Posts: 20
Likes: 0
Gradually lost power
Thanks for viewing.
Thread Starter
Heel & Toe
Joined: Feb 2005
Posts: 20
Likes: 0
Cleaned the Knock Sensor contacts
I cleaned the sensor and am no longer getting any 43 code. No service engine lights either. Engine still runs the same, stalls on acceleration. The mystery continues...
HELP
HELP
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
5 MOST and 5 LEAST Popular Corvette Model Years in History!
Joe Kucinski
2027 Corvette Buyer's Guide: Everything You Need to Know!
Joe Kucinski
10 Things C8 Corvette Owners Hate (But Won't Tell You)
Joe Kucinski
10 Best Corvettes Coming to Barrett-Jackson Palm Beach 2026!
Brett Foote
Every Corvette Grand Sport Explained! (C2, C4, C6, C7, & C8)
Joe Kucinski
Thread Starter
Heel & Toe
Joined: Feb 2005
Posts: 20
Likes: 0
Fuel pressure ...
Fuel pressure is 39 at key on. Also stays normal at engine start and keeps steady idle. At acceleration the needle does a dance downward until stalling out at zero. ????
When I tromp on the pedal there is a strange low throaty sound like "frump" up front like a cough. Could I have an exhaust problem that is choaking the engine? It almost sounds as thouugh the exhaust can't escape. The air filter is very clean and I tried solving problem by letting air in without the filter. I am thinking out of the box I know.
When I tromp on the pedal there is a strange low throaty sound like "frump" up front like a cough. Could I have an exhaust problem that is choaking the engine? It almost sounds as thouugh the exhaust can't escape. The air filter is very clean and I tried solving problem by letting air in without the filter. I am thinking out of the box I know.
Le Mans Master
Joined: Apr 2005
Posts: 8,077
Likes: 4
From: Scarborough ONTARIO
I dont know what yr ur car is? but i got 43 twice in last 2 yrs and everytime it comes along with code 33 (maf related). Mine is a 85 so it has a problem with maf burnoff module, replaced that and it solves my problem, both codes gone for good, but as a pre maintenance, i replaced KS as well as control module ECS(on p side bhind the wheel well).
Since u worked on Fuel pump and fuel filter concentrate on Fuel related for now, a fuel gauge will help, still same problem, than disconnect maf wire, n test drive within a block or ur driveway, car will start and idles fine until u drive a block than the problem comes,
So conclusion check Fuel related first than MAF.
but here is a nice description how vette start sequence and trubleshoot accordingly:
http://temp.corvetteforum.net/c4/vader86/.
Since u worked on Fuel pump and fuel filter concentrate on Fuel related for now, a fuel gauge will help, still same problem, than disconnect maf wire, n test drive within a block or ur driveway, car will start and idles fine until u drive a block than the problem comes,
So conclusion check Fuel related first than MAF.
but here is a nice description how vette start sequence and trubleshoot accordingly:
http://temp.corvetteforum.net/c4/vader86/.
