When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Is Checking codes on a '93 the same as for later years?...I know for 94 and up you check with Pin # 4 and #12 with a 16 pin system.
My '93 has an OBDI 12 Pin system. Do I check for codes with the #4 and #12 pins when using the paperclip method, or something different?
This is my first time trying this so I am just curious...
Man, My '78 L-82/4 speed car is so much easier to work on than this '93
Thanks!
A & B is for diagnostic trouble codes. Pin G is for the fuel pump.
Sorry but you are just as wrong as "rodj". I have a 93 and have performed the A to G method hundreds of times. I also have a factory service manual for a 93 and it says A to G. Guys if you don't know what your talking about then don't cause confusion for others.
Last edited by 93VettePilot; Dec 12, 2011 at 07:35 PM.
Sorry but you are just as wrong as "rodj". I have a 93 and have performed the A to G method hundreds of times. I also have a factory service manual for a 93 and it says A to G. Guys if you don't know what your talking about then don't cause confusion for others.
Originally Posted by kimmer
Not for a 92-93
I give, I give
I just had to see it one more time "you are wrong" to make me go out and find the info again.
So me and RODJ will take it in the neck on this one.