LS swap
Le Mans Master
Joined: Oct 2007
Posts: 9,699
Likes: 3,468
From: Akron Ohio
2025 Corvette of the Year Finalist - Modified
2024 C5 of the Year Winner - Modified
2023 C5 of the Year Finalist - Modified
2022 C5 of the Year Finalist - Modified
St. Jude Donor '09-'10-'11
Can you post a little more detail on the booster install? The C6 one is metal correct? I may be interested in this mod if it isnt too much more work for myself.
Thread Starter
Burning Brakes
Joined: Dec 2007
Posts: 1,125
Likes: 8
From: Taft TN
There are 2 dimples at the top after you remove the booster. Drill those out an the top is mounted. Measure down and 2 more holes to drill. You will need a backing plate for the lowers. That's as far as I got. The support will more than likely need to be notched. I'll have more when I get future.
Gonna try a new rack out while I'm in there.
Le Mans Master
Joined: Oct 2007
Posts: 9,699
Likes: 3,468
From: Akron Ohio
2025 Corvette of the Year Finalist - Modified
2024 C5 of the Year Winner - Modified
2023 C5 of the Year Finalist - Modified
2022 C5 of the Year Finalist - Modified
St. Jude Donor '09-'10-'11
There are 2 dimples at the top after you remove the booster. Drill those out an the top is mounted. Measure down and 2 more holes to drill. You will need a backing plate for the lowers. That's as far as I got. The support will more than likely need to be notched. I'll have more when I get future.
Melting Slicks
Joined: Feb 2011
Posts: 2,322
Likes: 6
From: Los Altos CA
Hi,
Been following this thread with interest. Got your note on the "other side" & figured I'd return the favor. It's great you've been able to get your son involved. I showed my youngest how to change a tire this morning, but that's not quite the same thing, eh?
Best regards,
Wayne
Been following this thread with interest. Got your note on the "other side" & figured I'd return the favor. It's great you've been able to get your son involved. I showed my youngest how to change a tire this morning, but that's not quite the same thing, eh?
Best regards,
Wayne
Le Mans Master
Joined: Mar 2001
Posts: 7,999
Likes: 14
From: Life is just one big track event. Everything before and after is prep and warm-up and cool-down laps
Cruise-In III Veteran
Cruise-In IV Veteran
St. Jude Donor '12
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Thread Starter
Burning Brakes
Joined: Dec 2007
Posts: 1,125
Likes: 8
From: Taft TN
Hi,
Been following this thread with interest. Got your note on the "other side" & figured I'd return the favor. It's great you've been able to get your son involved. I showed my youngest how to change a tire this morning, but that's not quite the same thing, eh?
Best regards,
Wayne
Been following this thread with interest. Got your note on the "other side" & figured I'd return the favor. It's great you've been able to get your son involved. I showed my youngest how to change a tire this morning, but that's not quite the same thing, eh?
Best regards,
Wayne
Flaming River billet rack. Just checking it out for now. So much to do with so little of time.
That's a new one
Burning Brakes
Joined: Nov 2010
Posts: 855
Likes: 36
From: Crystal Springs MS
