Need help!
Thread Starter
Instructor
Joined: Mar 2003
Posts: 239
Likes: 0
From: Toronto Ontario
Need help!
Car will only run with Knock sensor disconnected and TPS set to .44Volts
Can someone tell me why this is happening and when its connected, it back fires and runs rich. If I set the TPS to .54Volts its even worse
Can someone tell me why this is happening and when its connected, it back fires and runs rich. If I set the TPS to .54Volts its even worse
Thread Starter
Instructor
Joined: Mar 2003
Posts: 239
Likes: 0
From: Toronto Ontario
Re: Need help! (scorp508)
This has been a problem since I installed my modified motor.I also tried changing my 02 sensor to a heated one but still didnt work so I took it to the local performance shop and noticed they disconnected my knock sensor completly.Car seems to run fine but want to know why?
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski