Question for Vortech LT1 owners
Thread Starter
Drifting
Joined: Dec 1999
Posts: 1,330
Likes: 36
From: Waynesboro, PA
Co-winner 2020 C4 of the Year - Modified
Question for Vortech LT1 owners
On the Z bend aluminum tube, that connects to the heater core hose and runs along the frame, under the pivot of the right front upper control arm, which side of the thin a/c line did you run the tube on? Toward the engine, or between the line and the wheelwell? This is on a 94, which was the first year for R134A, so 92-93 may not have the same line there. Please take a look at your's and let me know. Thanks.
Safety Car
Joined: May 2003
Posts: 4,283
Likes: 0
From: Houston Texas
Re: Question for Vortech LT1 owners (POLOVETTE 94)
http://www.vortechsuperchargers.com/...s/4gv020im.pdf My kit is different but maybe this will help.
Le Mans Master
Joined: Jan 2003
Posts: 8,596
Likes: 19
From: Portland Oregon
Re: Question for Vortech LT1 owners (POLOVETTE 94)
In my car that tube went to the engine side of that small ac line. Meaning that the small tube is between the Z tube and the fender well fiberglass. I also wrapped some spare fire sleeving around the tube where it passes under the control arm to give it some insulation and abrasion resistance. You could also use corrugated tubing to do the same to protect the tube.
Thread Starter
Drifting
Joined: Dec 1999
Posts: 1,330
Likes: 36
From: Waynesboro, PA
Co-winner 2020 C4 of the Year - Modified
Re: Question for Vortech LT1 owners (POLOVETTE 94)
Cool. So either everybody agrees this is where it goes, or me and Tjwong are the only 2 people here with a Vortech 
Sounds good either way.
Sounds good either way.
