LED help needed???
Thread Starter
Team Owner
Joined: Jan 2004
Posts: 23,220
Likes: 3
From: HOUSTON
St. Jude Donor '06 thru '15, '19
Thread Starter
Team Owner
Joined: Jan 2004
Posts: 23,220
Likes: 3
From: HOUSTON
St. Jude Donor '06 thru '15, '19
sitting her drinking a beer and thought , surely I didnt turn the dimmer alll the way down... I did .Left the gate open the dogs got out, Needed to smack it with a hammer to get it to close better , last smack missed and almost broke my had when I hit it . Great night ....
Burning Brakes
Joined: Aug 2009
Posts: 945
Likes: 8
From: Olympia WA
sitting her drinking a beer and thought , surely I didnt turn the dimmer alll the way down... I did .Left the gate open the dogs got out, Needed to smack it with a hammer to get it to close better , last smack missed and almost broke my had when I hit it . Great night ....Swore I did it correctly.
Good advice on the board made me paranoid and I went back and checked my work Sunday morning.
Sure enough, I plugged it in to the K harness end.
Heck when I was in there, I didn't even notice the K harness the first time.
I was more jacked up reading the instructions for the install (and worried I might f up and lock the steering wheel) then using some common sense, slowing down and watching what I was doing.
It happens bro. We are all human.
Team Owner
Joined: May 1999
Posts: 22,830
Likes: 13
From: Columbus Ohio
CI 3-4, 8-9-10 Veteran
St. Jude Donor '06-'08-'10
Happens to everybody at one time or another. 
Buddy of mine had to replace the carb on his old 409. He did a great job pulling all the parts and pieces, replaced the carb, hooked everything back up and overall did a great job.
That is until he picked up the air filter housing to put it back on and noticed the new gasket for the carb laying on top of it.
Buddy of mine had to replace the carb on his old 409. He did a great job pulling all the parts and pieces, replaced the carb, hooked everything back up and overall did a great job.
That is until he picked up the air filter housing to put it back on and noticed the new gasket for the carb laying on top of it.
Thread Starter
Team Owner
Joined: Jan 2004
Posts: 23,220
Likes: 3
From: HOUSTON
St. Jude Donor '06 thru '15, '19
Well it all worked out , I might put the leds back in the footwells and the hatch and see what happens, but not tonight.Everything is back where it should be and working fine so I am happy. The knot on my hand didn't get to big either. I dont mind the mishap, hell I still like working on the vette, its fun. Gaarage time is always good time. brain farts for me just get more and more frequent but life is good!
brain farts for me just get more and more frequent but life is good!
Le Mans Master
Joined: May 2006
Posts: 5,987
Likes: 18
From: DuBois PA
St. Jude Donor '11-'12-'13-'14-'15
I was starting to scratch my head on this one!! Glad you found the Dimmer ****!! Although no volts on 16 would've taken me there anyway... Hey, You know your car a little better now and know you're not a carpenter! Good day!
Tim
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
Thread Starter
Team Owner
Joined: Jan 2004
Posts: 23,220
Likes: 3
From: HOUSTON
St. Jude Donor '06 thru '15, '19
Do not know George, does he know about electrical problems?