ebay Header Install
Safety Car
Joined: Apr 2003
Posts: 3,968
Likes: 0
From: Biloxi MS Theres something happenin' here, What it is ain't exactly clear.....
Safety Car
Joined: Apr 2003
Posts: 3,968
Likes: 0
From: Biloxi MS Theres something happenin' here, What it is ain't exactly clear.....
wasnt sure how much of an angle they take when mounted..
so I went with the headers upright and perfectly vert. where they bolt up..
and then a few shots of them with the mounting tabs horizontal to eachother.
so I went with the headers upright and perfectly vert. where they bolt up..
and then a few shots of them with the mounting tabs horizontal to eachother.
Le Mans Master
Joined: May 2006
Posts: 5,987
Likes: 18
From: DuBois PA
St. Jude Donor '11-'12-'13-'14-'15
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
Safety Car
Joined: Apr 2003
Posts: 3,968
Likes: 0
From: Biloxi MS Theres something happenin' here, What it is ain't exactly clear.....
I will get the tabs to line up like yours if possible
Backin a flash
Le Mans Master
Joined: May 2006
Posts: 5,987
Likes: 18
From: DuBois PA
St. Jude Donor '11-'12-'13-'14-'15
"Back in a FLASH" huh? No pun intended? 
If you could get a shot dead on from the backside, that would clinch it... Like RIP's comparison shots of his and Stockers?
If you could get a shot dead on from the backside, that would clinch it... Like RIP's comparison shots of his and Stockers?
Last edited by tstar; Apr 12, 2007 at 12:52 AM.
Safety Car
Joined: Apr 2003
Posts: 3,968
Likes: 0
From: Biloxi MS Theres something happenin' here, What it is ain't exactly clear.....
well, i didnt see that suggestion till now..
here is the link to what i just shot -
1 set up where I assume they would be in the car
and
1 set like yours with the tabs pushed up side by side
http://www.rainontheinternet.com/EBAYHEADERS/oldORnew/
here is the link to what i just shot -
1 set up where I assume they would be in the car
and
1 set like yours with the tabs pushed up side by side
http://www.rainontheinternet.com/EBAYHEADERS/oldORnew/
Safety Car
Joined: Apr 2003
Posts: 3,968
Likes: 0
From: Biloxi MS Theres something happenin' here, What it is ain't exactly clear.....
Le Mans Master
Joined: May 2006
Posts: 5,987
Likes: 18
From: DuBois PA
St. Jude Donor '11-'12-'13-'14-'15
Yeah sorry about that, I added it later..
I think you're OK. On most of em your bung looks angled correctly... BUT that last post you just made, it looks like mine doesn't it?
Maybe not, it looks angled towards the end of the collector more... cripes this is harder then I thought!
I think you're OK. On most of em your bung looks angled correctly... BUT that last post you just made, it looks like mine doesn't it?
Maybe not, it looks angled towards the end of the collector more... cripes this is harder then I thought!
Safety Car
Joined: Apr 2003
Posts: 3,968
Likes: 0
From: Biloxi MS Theres something happenin' here, What it is ain't exactly clear.....
putting new pics up now - like RIP's
65,66,& 67 were at one angle
69,70,71,72 I adjusted the tabs a bit more level
http://www.rainontheinternet.com/EBA...differentView/
65,66,& 67 were at one angle
69,70,71,72 I adjusted the tabs a bit more level
http://www.rainontheinternet.com/EBA...differentView/
Le Mans Master
Joined: May 2006
Posts: 5,987
Likes: 18
From: DuBois PA
St. Jude Donor '11-'12-'13-'14-'15
putting new pics up now - like RIP's
65,66,& 67 were at one angle
69,70,71,72 I adjusted the tabs a bit more level
http://www.rainontheinternet.com/EBA...differentView/
65,66,& 67 were at one angle
69,70,71,72 I adjusted the tabs a bit more level
http://www.rainontheinternet.com/EBA...differentView/
Safety Car
Joined: Apr 2003
Posts: 3,968
Likes: 0
From: Biloxi MS Theres something happenin' here, What it is ain't exactly clear.....
GOOD
having trouble keepin my eyes open.
Im off to bed (after I pack the headers back up in their bubble wrap and into the box where they live a few more days)
THANKS!
Rain
having trouble keepin my eyes open.
Im off to bed (after I pack the headers back up in their bubble wrap and into the box where they live a few more days)
THANKS!
Rain
Racer
Joined: Aug 2006
Posts: 345
Likes: 0
From: Lake City AR
I wrote SS yesterday and sent them some pics of my setup compared to Stocker waiting on a comment back. I was looking at the pics again last night an to me it looks like my PS bung is welded in the middle of the 9:00 to 10:00 positon and mine is welded in the into the 10:00 position. Look how much closer his bung is to the bracket than mine is.
His:
Mine:
His:
Mine:
Pro
Joined: Jan 2007
Posts: 552
Likes: 0
From: Lincoln Ne.
RIP, your PS header is identical to my old style PS header, you have the wrong PS header, no doubt Ill get the intermediate pipe length asap but I have the clamps on so it will be an approximate. Plus I actually have a bit of a gap between the cat and the end of the collector.
When I get home, I will take some pics of the o2 bung angle of my OLD sytle headers w/ the tabs parallel to the ground to end any discussion if you have the old or new style header. The PS was more problematic but both of my o2s hit the TT/BH
Dave
When I get home, I will take some pics of the o2 bung angle of my OLD sytle headers w/ the tabs parallel to the ground to end any discussion if you have the old or new style header. The PS was more problematic but both of my o2s hit the TT/BH
Dave
Last edited by STOCKER; Apr 12, 2007 at 12:21 PM.
Le Mans Master
Joined: May 2006
Posts: 5,987
Likes: 18
From: DuBois PA
St. Jude Donor '11-'12-'13-'14-'15
Well? Now what?
They are VERY emphatic that there is and was no left over stock of the older Headers. I mean emphatic to the point of being pissed! If that's so, then their production isn't the best or they have an inhouse comm problem...
I got the first set and it was off, then RIP and Stocker right? Then Rain got his, Rain's look good from what I can tell. then Stocker got his second set and it's good... So the first three shipped were bad and the last two good?
Has anyone else out there recieved these and installed em???
They are VERY emphatic that there is and was no left over stock of the older Headers. I mean emphatic to the point of being pissed! If that's so, then their production isn't the best or they have an inhouse comm problem...
I got the first set and it was off, then RIP and Stocker right? Then Rain got his, Rain's look good from what I can tell. then Stocker got his second set and it's good... So the first three shipped were bad and the last two good?
Has anyone else out there recieved these and installed em???
