Vararam Intake installed
Thread Starter
Intermediate
Joined: May 2006
Posts: 31
Likes: 0
From: Lugoff SC
Vararam Intake installed
Just installed the Vararam B-2 intake from the group purchase. Install only took 2 hours. Fitment was fairly good. Only issue was installing the air dam in front of the radiator since the intake bowed it out some. Really looks nice and sounds much better than the previous Halltech intake sucking in air from the hood area. 
Thread Starter
Intermediate
Joined: May 2006
Posts: 31
Likes: 0
From: Lugoff SC
Relaern
I did a relearn after installing the Halltech, not after this one. I just followed the instructions and let it idle for a few minutes before I drove it. I then did some light stop and go driving to get it acclimated. Everything's fine now, no issues. Really like the intake.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Pro
Joined: Feb 2006
Posts: 616
Likes: 0
From: Vancleave Ms.
Originally Posted by maf03vette
Just installed the Vararam B-2 intake from the group purchase. Install only took 2 hours. Fitment was fairly good. Only issue was installing the air dam in front of the radiator since the intake bowed it out some. Really looks nice and sounds much better than the previous Halltech intake sucking in air from the hood area.
James
