427 Installation Complete!
Thread Starter
Le Mans Master
Joined: Apr 2001
Posts: 5,475
Likes: 718
From: Black Forest CO
Former Vendor
Joined: May 2006
Posts: 115
Likes: 0
From: Dearborn Heights Michigan
Thread Starter
Le Mans Master
Joined: Apr 2001
Posts: 5,475
Likes: 718
From: Black Forest CO
I am hoping that someone comes out with an alternative L92 capable intake that will fit under the hood of a Vette.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Former Vendor
Joined: May 2006
Posts: 115
Likes: 0
From: Dearborn Heights Michigan
Thread Starter
Le Mans Master
Joined: Apr 2001
Posts: 5,475
Likes: 718
From: Black Forest CO
Pro
Joined: May 2006
Posts: 593
Likes: 12
From: Maryland Heights MO
Please let us know what the dyno results are. I will consider doing this instead of ever buying a C6. I love the C5 body. $11K is not bad for the power.
What did you do with the LS1 engine by the way?
What did you do with the LS1 engine by the way?
Le Mans Master
Joined: Sep 2001
Posts: 8,840
Likes: 43
From: State of Confusion.
That looks Really Nice and I'll bet she'll run Great! 
This is just a suggestion and might not make that big of a difference, but you might want to change from the intake bellows (the accordian looking piece in front of the throttle body) to a smooth silicone one. If your intake is going to be the choke point of your setup, then every little bit of airflow helps. Just my .02.
This is just a suggestion and might not make that big of a difference, but you might want to change from the intake bellows (the accordian looking piece in front of the throttle body) to a smooth silicone one. If your intake is going to be the choke point of your setup, then every little bit of airflow helps. Just my .02.
