Remote bleeder orientation when installed
Thread Starter
Team Owner
Joined: Mar 1999
Posts: 22,025
Likes: 192
From: At the beach in little Rhody
Remote bleeder orientation when installed
I have the hose all locked down. Is this the best orientation for the hose when installed? Appears it will then run up towards the brake booster and should work but want to see if anyone has a better angle to install it?
Note that I had some extra of the fiber cloth covering that goes to the rear O2's so I put a piece over the bleeder.
Note that I had some extra of the fiber cloth covering that goes to the rear O2's so I put a piece over the bleeder.
