Cam install advice please..
Thread Starter
Racer
Joined: Oct 2007
Posts: 359
Likes: 0
From: Long Island NY
Cam is in
Cam is in! Got the dots lined up on the first try..damn im good!
I took a step back and looked at all the crap i took out of this car scattered around the garage and got that >what the hell was i thinking< feeling. Slowly but surely its goin back together
I took a step back and looked at all the crap i took out of this car scattered around the garage and got that >what the hell was i thinking< feeling. Slowly but surely its goin back together
Tech Contributor
Joined: Dec 1999
Posts: 32,910
Likes: 2,402
From: Anthony TX
CI 6,7,8,9,11 Vet
St. Jude Donor '08
Heres a FUNNY FRIDAY STORY!
Today,, I had some free time during lunch and I pulled up the forum and saw this post. Cool,,,Novakain1970 is doing the same project that I'm doing. I reading down the post and saw BLOWNBLUEZ06 post.
Holy Crap! I was sitting there at work with KNOTS on my stomach! I thought I was going to puke
I couldn't for the life of me remember if I checked that or not. I was ready to just shut down and go home and check! I figured that I would visit Murphy and his school of laws and it would be in BSS ACKWARDS!
All day I stressed over it. I already started doing the un-install in my head.
Well,,,I got home and ran right to the car and checked! Dam-it, its in there DEEEEEEEP So I viewed it from under the car and WHEW!
All is good in HP TOWN!
SO,,,,,, BLOWNBLUEZ06 ,,,,,,THANK YOU very much for that very excellent info!
Bill C
Today,, I had some free time during lunch and I pulled up the forum and saw this post. Cool,,,Novakain1970 is doing the same project that I'm doing.
I reading down the post and saw BLOWNBLUEZ06 post. Holy Crap!
I was sitting there at work with KNOTS on my stomach! I thought I was going to puke I couldn't for the life of me remember if I checked that or not. I was ready to just shut down and go home and check! I figured that I would visit Murphy and his school of laws and it would be in BSS ACKWARDS! All day I stressed over it.
I already started doing the un-install in my head. Well,,,I got home and ran right to the car and checked!
Dam-it, its in there DEEEEEEEP So I viewed it from under the car and WHEW! All is good in HP TOWN! SO,,,,,, BLOWNBLUEZ06 ,,,,,,THANK YOU very much for that very excellent info!
Bill C
Burning Brakes
Joined: Jun 2006
Posts: 933
Likes: 0
From: St. Paul MN
Heres a FUNNY FRIDAY STORY!
Today,, I had some free time during lunch and I pulled up the forum and saw this post. Cool,,,Novakain1970 is doing the same project that I'm doing. I reading down the post and saw BLOWNBLUEZ06 post.
Holy Crap! I was sitting there at work with KNOTS on my stomach! I thought I was going to puke I couldn't for the life of me remember if I checked that or not. I was ready to just shut down and go home and check! I figured that I would visit Murphy and his school of laws and it would be in BSS ACKWARDS!
All day I stressed over it. I already started doing the un-install in my head.
Well,,,I got home and ran right to the car and checked! Dam-it, its in there DEEEEEEEP So I viewed it from under the car and WHEW! All is good in HP TOWN!
SO,,,,,, BLOWNBLUEZ06 ,,,,,,THANK YOU very much for that very excellent info!
Bill C
Today,, I had some free time during lunch and I pulled up the forum and saw this post. Cool,,,Novakain1970 is doing the same project that I'm doing.
I reading down the post and saw BLOWNBLUEZ06 post. Holy Crap!
I was sitting there at work with KNOTS on my stomach! I thought I was going to puke I couldn't for the life of me remember if I checked that or not. I was ready to just shut down and go home and check! I figured that I would visit Murphy and his school of laws and it would be in BSS ACKWARDS! All day I stressed over it.
I already started doing the un-install in my head. Well,,,I got home and ran right to the car and checked!
Dam-it, its in there DEEEEEEEP So I viewed it from under the car and WHEW! All is good in HP TOWN! SO,,,,,, BLOWNBLUEZ06 ,,,,,,THANK YOU very much for that very excellent info!
Bill C
Hehe I was worried about it too...same knots in my stomach. I had already installed the puller and the rack. I see that the gasket could go on flipped but its pretty difficuly to screw it up. I remember that I put the gasket on the timing cover first to make sure it lined up with the appropriate curves of the timing cover.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
5 MOST and 5 LEAST Popular Corvette Model Years in History!
Joe Kucinski
2027 Corvette Buyer's Guide: Everything You Need to Know!
Joe Kucinski
Tech Contributor
Joined: Dec 1999
Posts: 32,910
Likes: 2,402
From: Anthony TX
CI 6,7,8,9,11 Vet
St. Jude Donor '08
Nope, for all the grease, little issues, and set backs, I still get tremendous satisfaction doing it all myself. We did a cam install project once on ENGLANDGREENS car when he lived in CT. There were 4 of of turning wrenches and throwing parts. It went together pretty darn quick and we were very successful. Did it over a weekend.
BC
Thread Starter
Racer
Joined: Oct 2007
Posts: 359
Likes: 0
From: Long Island NY
Its Alive!!!!!
The car fired up first turn of the key! Sounds great for a GM cam let me tell ya I plan on getting the car tuned/dynoed asap so ill let you know the power gains of the cam. Thanks everyone for your help, couldnt have done it without you
I plan on getting the car tuned/dynoed asap so ill let you know the power gains of the cam. Thanks everyone for your help, couldnt have done it without you
