#7 spark plug wire
Thread Starter
Instructor
Joined: Oct 2002
Posts: 106
Likes: 6
From: Cle Elum, WA
#7 spark plug wire
I dont know if i'm an idiot or what, but replaced the wires with MSD stuff and now the #7 wire keeps popping off after every 2-3,000 miles. I'll hear the two clicks at the coil, but it'll work its way off and pop off. Is there a special way to route the wire so its not pulled off by the AIR tube?
Tech Contributor
Joined: Dec 1999
Posts: 32,910
Likes: 2,402
From: Anthony TX
CI 6,7,8,9,11 Vet
St. Jude Donor '08
I insert a LONG thin "ZIP-TIE" in the boot and then insert the boot on the plug or coil tower. When the boot is seated,,,tug outward on the ZIP-TIE and that will release any trapped air and prevent the boot from popping off due to any pressure differential.
It worked very well for me,
BC
It worked very well for me,
BC
Melting Slicks
Joined: Aug 2006
Posts: 2,167
Likes: 11
From: Powell TN
Cruise-In VIII Veteran
I dont know if i'm an idiot or what, but replaced the wires with MSD stuff and now the #7 wire keeps popping off after every 2-3,000 miles. I'll hear the two clicks at the coil, but it'll work its way off and pop off. Is there a special way to route the wire so its not pulled off by the AIR tube?
Achmed (How do you spell that? ...A...C...phlegm...), the Dead Terrorist.
