Window alignment
Thread Starter
Instructor
Joined: Dec 2011
Posts: 221
Likes: 0
From: Auburn Alabama
Window alignment
Anyone local to Auburn able to assist with curing wind noise?
I'd rather not throw 2 hours of labor at the dealer
I've tried the adjustments I can reach without pulling off the door skin.
I'll supply the bottle of scotch (you can keep it too!)
I'd rather not throw 2 hours of labor at the dealer
I've tried the adjustments I can reach without pulling off the door skin.
I'll supply the bottle of scotch (you can keep it too!)
Le Mans Master
Joined: Sep 2003
Posts: 6,276
Likes: 227
From: Farmington CT
Cruise-In VII Veteran
window attaches to the reg. with 2 bolts/clamps, front/rear.........
The cable pulleys attach at 4 points, then you have the 10-15 C5 window/targa seals that are starting to rot/tear/etc.
I'd pull the door panel and start with the window glass clamps
The cable pulleys attach at 4 points, then you have the 10-15 C5 window/targa seals that are starting to rot/tear/etc.
I'd pull the door panel and start with the window glass clamps
Pro
Joined: Sep 2008
Posts: 537
Likes: 2
From: Whitesboro Texas
Did the noise start all of a sudden, or have you replaced you regulator recently?
There are two rubber plugs underneath the door that you can remove. Inside is a screw to adjust the window. They are an E8 (reverse torx) I believe.
There are two rubber plugs underneath the door that you can remove. Inside is a screw to adjust the window. They are an E8 (reverse torx) I believe.
Thread Starter
Instructor
Joined: Dec 2011
Posts: 221
Likes: 0
From: Auburn Alabama
Being in a apartment complex and studying full time for a doctorate precludes doing much more than that on my own time.
