but the whole IPC.
Need DIC Help
Thread Starter
Advanced
Joined: Aug 2013
Posts: 54
Likes: 0
From: Las Vegas Nevada
Purchase or borrow a strong magnifying glass and examine EACH one of the soldered pins for the display. The solder joint should be smooth and continuous and shouldn't have any cracks.
Some of the solder joints on the EBTCM board are horrible. I cant believe that they passed inspection.
One of the solder joints on your board or something where the vacuum florescent tube connects is poor.
Bill
Some of the solder joints on the EBTCM board are horrible. I cant believe that they passed inspection.
One of the solder joints on your board or something where the vacuum florescent tube connects is poor.
Bill
Le Mans Master
Joined: Mar 2011
Posts: 6,835
Likes: 302
From: Columbia SC
This could also be the time to maybe see if a local electronics repair store might be able to see a problem. I remember when I looked at my dim HVAC solder joints they did not look bad. Resoldered them and now it works fine.
Thread Starter
Advanced
Joined: Aug 2013
Posts: 54
Likes: 0
From: Las Vegas Nevada
Tech Contributor
Joined: Dec 1999
Posts: 32,910
Likes: 2,402
From: Anthony TX
CI 6,7,8,9,11 Vet
St. Jude Donor '08
I AGREE!
Just make sure that you properly communicate to the repair tech that you have an INTERMITTANT issue with the vacuum display. That will allow him to concentrate on looking in the correct areas.
Bill
Just make sure that you properly communicate to the repair tech that you have an INTERMITTANT issue with the vacuum display. That will allow him to concentrate on looking in the correct areas.
Bill
Tech Contributor
Joined: Dec 1999
Posts: 32,910
Likes: 2,402
From: Anthony TX
CI 6,7,8,9,11 Vet
St. Jude Donor '08
Like I stated earlier "
YOUR DIC IS DEAD.... Thats what she said!
I once told a FEMALE FORUM member (Not knowing I was speaking to a FEMALE),,, that you need to read your DIC and get the codes.
It turned out funny BUT,, it could have gone in a completely different direction!
BC
YOUR DIC IS DEAD.... Thats what she said!
I once told a FEMALE FORUM member (Not knowing I was speaking to a FEMALE),,, that you need to read your DIC and get the codes.
It turned out funny BUT,, it could have gone in a completely different direction!
BC
Thread Starter
Advanced
Joined: Aug 2013
Posts: 54
Likes: 0
From: Las Vegas Nevada
Like I stated earlier "
YOUR DIC IS DEAD.... Thats what she said!
I once told a FEMALE FORUM member (Not knowing I was speaking to a FEMALE),,, that you need to read your DIC and get the codes.
It turned out funny BUT,, it could have gone in a completely different direction!
BC
YOUR DIC IS DEAD.... Thats what she said!
I once told a FEMALE FORUM member (Not knowing I was speaking to a FEMALE),,, that you need to read your DIC and get the codes.
It turned out funny BUT,, it could have gone in a completely different direction!
BC
Drifting
Joined: Nov 2011
Posts: 1,401
Likes: 141
From: Summerville South Carolina
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
