$161 Radiator Installed
Thread Starter
Racer
Joined: Aug 2015
Posts: 316
Likes: 45
From: Sarasota
AMP Racing
Joined: Aug 2006
Posts: 10,753
Likes: 588
From: Washington TWP NJ
2023 C5 of the Year Finalist - Modified
2017 C5 of Year Finalist
St. Jude Donor '09-'10-'11-'12
But if you have a manual trans, you can use it for an oil cooler.
Not that I would, but I'm sure some people might.
Not that I would, but I'm sure some people might.
Last edited by C5 Pete; Jun 14, 2017 at 10:29 PM.
Race Director
Joined: Mar 2008
Posts: 12,413
Likes: 501
From: Rio Rancho NM
I wish they made a cut down version but I may have a radiator shop cut it down for me. That's what I did with my stocker for the 4" dongle. So may order this guy or the others I see on ebay
Race Director
Joined: May 2006
Posts: 10,738
Likes: 447
From: EAST TENNESSEE
Drifting
Joined: Nov 2005
Posts: 1,320
Likes: 242
From: NW Chicago
St. Jude Donor '12-'13-'14-'15
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
Thread Starter
Racer
Joined: Aug 2015
Posts: 316
Likes: 45
From: Sarasota
Just another update. Finally got back to the track in October and during 3 80+ degree days the coolant temps stayed below 230. The oil was at 258 so the next project will address that.
Marc
Marc
Le Mans Master
Joined: May 2006
Posts: 5,747
Likes: 224
From: Hillsboro Oregon
Thanks Marc,
I suspect they will be sized for the 97-00 rather than the 01-04.
GM changed the fittings on the rad in 01........but it may be possible to adapt if known ahead of the install.
I suspect they will be sized for the 97-00 rather than the 01-04.
GM changed the fittings on the rad in 01........but it may be possible to adapt if known ahead of the install.
Last edited by jrprich; Nov 1, 2017 at 09:29 PM.
Safety Car
Joined: Mar 2016
Posts: 3,534
Likes: 432
From: Atlantic Beach FL.
Last edited by Rob 02; Nov 1, 2017 at 11:22 PM.
Le Mans Master
Joined: May 2006
Posts: 5,747
Likes: 224
From: Hillsboro Oregon
Safety Car
Joined: Mar 2016
Posts: 3,534
Likes: 432
From: Atlantic Beach FL.
My '02 has the quick disconnect fittings for the A4 trans lines. The thread type is different in earlier models. I don't recall the specific details but I remember there being plenty of information on the forum when I searched it.
If you have a M6 I don't think it matters.
If you have a M6 I don't think it matters.
Banned Scam/Spammer
Joined: Sep 2016
Posts: 4,004
Likes: 3,929
From: Philadelphia PA (Birthplace of the USA, UNESCO World Heritage City)
That Aliexpress link didn't work and the cheapest radiator there is $190. Here's a $161 all aluminum radiator on ebay:
https://www.ebay.com/itm/FIT-1998-19...1Z1P3j&vxp=mtr
Not sure if this is the same one the OP has, or the quality of it.
https://www.ebay.com/itm/FIT-1998-19...1Z1P3j&vxp=mtr
Not sure if this is the same one the OP has, or the quality of it.
Le Mans Master
Joined: May 2006
Posts: 5,747
Likes: 224
From: Hillsboro Oregon
That Aliexpress link didn't work and the cheapest radiator there is $190. Here's a $161 all aluminum radiator on ebay:
https://www.ebay.com/itm/FIT-1998-19...1Z1P3j&vxp=mtr
Not sure if this is the same one the OP has, or the quality of it.
https://www.ebay.com/itm/FIT-1998-19...1Z1P3j&vxp=mtr
Not sure if this is the same one the OP has, or the quality of it.
"What is the thread size of the transmission cooler in/outs on the right side tank on this K-Tuning radiator?"
This is the answer I got today.......anyone out there know how to translate this?
New message from: at_autoparts Top Rated Seller(1,777Red Star)
"Hi Buddy
it's ￠38×292×1/2-20UNF(Z) to 5/8-18unf inside"
