When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I'm MN6 and plan to swap my broken stock 3.42 diff for the 3.15 diff from my spare c5 (who is an auto)
First, i pull the 3.15 diif, and we hurt the trans output shaft seal
So, i was looki,g for buy some seal, but as this seal (ref acdelco 24228816) is only for auto (and i will use the diff on my stick vette), does i simply have to remove this seal ?
Also, does i have to change the two rear axle seal (they seems to be good) or can i reinstall axle without new seal (ref is 88996703) ?
The seal/aluminum piece that says trans side in pic will not be used if going into manual transmission just remove it but you will need a new o ring seal where the trans mounts to diff
I will try to find them but i think my spare diff had new on them when i bye the entire spare car (and i use this car less than 1 year)
I have to check for having them faster as they purpose (as i live in europe, shop usualy speak about delivery between Nov. 6 and Nov. 10 and i will use them the 4 Nov
Also, they will cost 3 or 4x more (cause ship/fee/custom...)
And for upgrade, i plan to going C6Z gearbox/diff, this diff if just for putting back on the road asap ^^