When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
If you have disconnected your CAGS solenoid, this is probably it. If you have a resistor or bypass plug in place, it may have come loose or somehow not working.
P0103 is: MAF (mass airflow) sensor circuit high frequency.
No idea what could cause that, maybe someone else knows.
P0803 is 1 to 4 Upshift Solenoid Control Ckt
P0103 is MAF Sensor Circuit High Freq
First one sounds like a CAGS problem, maybe some of the other members can help. :thumbs:
I had the codes PO803 and PO801 "Reverse Inhibit". With these codes I would always get PO102 MAF Sensor Circuit Low Freq A" The CAGS was burned so dealer took it off and said that should fix the two codes. (I have the burnt CAGS may see if I can return it???)
Codes again. Dealer took speed shifter out. (Kept it, it is in a box in my garage)
:smash:
Codes again {Finally they traced it to a wiring harness} I have only had the car back since Friday. It took them several trips and several months to finally fix.
Never had the PO102 by it's self. I think in might be triggered by the other codes?? (need to get my speed shifter reinstalled for free, dealer will pay
:boxing