acceleration problems
Thread Starter
Cruising
Joined: Oct 2003
Posts: 11
Likes: 0
From: San Ramon CA
acceleration problems
I just bought my first Vette, 50th AE. I'ts great! Although now that I'm getting use to it, it seams as if there is a delay when I punch the throttle from about 30%. What could cause this delay?
Also, thanks for developing this forum. I've been checking it out well before I bought my vette. Cheers :cheers: [IMG][/IMG]
Also, thanks for developing this forum. I've been checking it out well before I bought my vette. Cheers :cheers: [IMG][/IMG]
Thread Starter
Cruising
Joined: Oct 2003
Posts: 11
Likes: 0
From: San Ramon CA
Re: acceleration problems (rhoeven)
I have a six speed. I notice the lag mainly in first gear when I start to accelerate from about 30% throttle to wide open. The lag is about 2 seconds before re-engaging.
Le Mans Master
Joined: Jun 2003
Posts: 9,251
Likes: 217
From: 2007 Nat'l Corvette Challenge 11.50 index Champ. New Jersey
Re: acceleration problems (rhoeven)
:iagree:
Sometimes the tires are spinning & you can't hear anything! Happens to me sometimes, so I'm used to it & can tell if/when it's happening! Hope that's all it is!
Sometimes the tires are spinning & you can't hear anything! Happens to me sometimes, so I'm used to it & can tell if/when it's happening! Hope that's all it is!
Le Mans Master
Joined: Jan 2003
Posts: 6,298
Likes: 0
From: Tyler TX
Re: acceleration problems (Stanman)
Welcome to the board and I hope the problem is minor.
:thumbs: :seeya
I just bought my first Vette, 50th AE. I'ts great! Although now that I'm getting use to it, it seams as if there is a delay when I punch the throttle from about 30%. What could cause this delay?
Also, thanks for developing this forum. I've been checking it out well before I bought my vette. Cheers :cheers: [IMG][/IMG]
Also, thanks for developing this forum. I've been checking it out well before I bought my vette. Cheers :cheers: [IMG][/IMG]
Administrator
Joined: Mar 2001
Posts: 368,324
Likes: 24,777
From: In a parallel universe. Currently own 2014 Stingray Coupe.
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03 thru '26
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
Re: acceleration problems (Stanman)
Welcome and congrats on the new Vette. Hopefully it is just wheelspin.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Thread Starter
Cruising
Joined: Oct 2003
Posts: 11
Likes: 0
From: San Ramon CA
Re: acceleration problems (WWK888)
Well, when your without power it seams longer than it probably is. You may be right it could be wheel spin. Now that I think of it, this doesn't happen in any other gear. thanks for your help>
Advanced
Joined: Oct 2002
Posts: 57
Likes: 0
From: CRANSTON RI
Re: acceleration problems (Stanman)
the problem is this your cam doesnt make power until about 3500 the ls1 motor is great but it doesnt start to build peek torque until the high rpms. dont worry there is a ton of after market parts to fix that and anybody who says it weel spin is dead wrong a stock c5 in my opinion is a dead slug thats why you have to start with bolt on modifications if you want to fix your accelerating problem put 3.90s or 4.10s in spend 1800 because thats what it cost to do everything including the computer but you will have twice the car you have now. be care full alot of after market parts are a scam a donot do much but three things I know that work excellent a good set of long tube headers xpipe and exhaust, gears, and air intake the most important is gears its like riddind a 10 speed bike if you start off in the tenth speed setting its harder to get going compared if you start in first
Advanced
Joined: Oct 2002
Posts: 57
Likes: 0
From: CRANSTON RI
Re: acceleration problems (Stanman)
one more thing if you put the peddle to the floor and cant tell if the wheels are spinning you shouldnt be driving a corvette get something that has front wheel drive because thats pretty scarry
Pro
Joined: Oct 2002
Posts: 522
Likes: 0
From: Ridgeland MS
Re: acceleration problems (LS1NUT)
the problem is this your cam doesnt make power until about 3500 the ls1 motor is great but it doesnt start to build peek torque until the high rpms.
Here's a breakdown of my dyno sheet per every 100rpm (just had intake and exhaust when this was done. Over 300lb' at 2800 all the way to 5700rpm = FUN!)
Advanced
Joined: Oct 2002
Posts: 57
Likes: 0
From: CRANSTON RI
Re: acceleration problems (Stanman)
2800 or 3500 is relitivily in the same range ok so I m a few rpms off big deal and remember the tach on the dyno is not in calabration with the factory one so on the dyno its 2800 in the car its 3300-3500 ok close enough call it day
Thread Starter
Cruising
Joined: Oct 2003
Posts: 11
Likes: 0
From: San Ramon CA
Re: acceleration problems (denali)
I haven't tried an aftermarket air filter yet . . .I'm a little confused of which to buy. I've been reading this forum for quite a while and there seams to be a lot of talk about the Varam and the Blackwing.
