Front Plate
#21
Racer
#23
Melting Slicks
There's a BMW M3 at work that utilizes the stock front tow hook hole to hold a license plate frame, our cars for some reason do not come with stock front tow hook locations (C'MON MAN!) but I wonder it there's a company that makes something similar for plates? I mean you can buy the front tow hook for the C6 vette but it's a PITA to mount because you have to take the front bumper off but if they can make a front tow hook then someone should make a front license plate bracket the same way...
#24
Drifting
#27
Instructor
Alaska requires front plate, but has no registration tags on them. Dumbest damned law I can think of, so I have RPI remote control mount. Hides under car on open road and in city it's displayed. Sometimes.
#29
Get Top Flight mounting hardware, Texas black plate to blend with the grill, and take it off when you want.
Attachment 47788836
Attachment 47788836
#30
Melting Slicks
Here in So Cal I just don't have the front plate on and never get bothered by the sheriff, which is interesting because when I drove a ricer in my younger days they would pull me over FOR ANY AND EVERYTHING! I guess they just leave American super cars alone...
#32
Plate
Welcome to TX and the $200 fine for no front plate. Not the bracket I have on my GS but one of the nice looking ones. Many many choices from vendors check out their pictures find one you like buy install then shop for tires and repeat often.
The Top Flight Reproductions C6 front license plate bracket is the best looking mount available. It follows the contour of the front bumper. Installs easily without lifting the car. Requires no drilling for attachment like some others do. Our bracket is priced considerably lower than other after market solutions and is made in the USA .
www.topflightrepro.com
The Top Flight Reproductions C6 front license plate bracket is the best looking mount available. It follows the contour of the front bumper. Installs easily without lifting the car. Requires no drilling for attachment like some others do. Our bracket is priced considerably lower than other after market solutions and is made in the USA .
www.topflightrepro.com
#33
Safety Car
I just don't feel the love like many others here on the Top Flight bracket.
#34
Safety Car
Beware of this Texas law: http://legiscan.com/TX/text/SB1757/id/827300
Different people define it different ways, and it was aimed at plate flippers, but it could apply to the show n go. I'll have to look it up when I get back home.
Different people define it different ways, and it was aimed at plate flippers, but it could apply to the show n go. I'll have to look it up when I get back home.
Last edited by jedblanks; 04-26-2014 at 08:16 PM.
#36
Advanced
The Top Flight Reproductions C6 front license plate bracket is the best looking mount available. It follows the contour of the front bumper. Installs easily without lifting the car. Requires no drilling for attachment like some others do. Our bracket is priced considerably lower than other after market solutions and is made in the USA .
www.topflightrepro.com
www.topflightrepro.com
Get Top Flight mounting hardware, Texas black plate to blend with the grill, and take it off when you want.
Attachment 47788836
Attachment 47788836
#37
Burning Brakes
[IMG][/IMG] now I just drive it, cant see the plate sitting when driving.
#38
Safety Car
I like the West Coast Fast on/off bracket. I like the fact that it's to the side instead of the center of the car.
It cost more than the Top Flight one.
There's lots to choose from.
http://www.westcoastcorvette.com/p-3...and-sport.aspx
It cost more than the Top Flight one.
There's lots to choose from.
http://www.westcoastcorvette.com/p-3...and-sport.aspx
#39
Melting Slicks
This is mine and it will stay until the car starts to over heat in Texas traffic. this has been fine with cool weather but I worry about the TFR blocking the air flow when it gets really hot.
PS: Found the black rubber frame at PEP Boys for $10. Most of the plastic frames will break when you bend them to fit.
PS: Found the black rubber frame at PEP Boys for $10. Most of the plastic frames will break when you bend them to fit.
Last edited by Arkay; 05-04-2014 at 01:53 PM.
#40
5th Gear
Thread Starter
Member Since: Dec 2013
Location: Baytown Texas
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for all the input. I finally decided to just use the MFG bracket. I chose to install it a bit lower than original and actually did drill 2 small holes to hold it strong. I did NOT like the original location and think it looks better a bit lower. Will try to post photos when it comes back from the shop for air problems.
Last edited by Jerry7111; 08-21-2014 at 10:14 AM. Reason: typo