C7 headlights modification
#441
Love the look
The following 2 users liked this post by 03hdfatboy:
Crazy Cowboy (02-04-2018),
Kevin Ramey (02-03-2018)
#442
Premium Supporting Vendor
Thread Starter
Member Since: Nov 2003
Location: www.EXOTICVETTE.com - FL Cruise-In VI, VII, & VIII
Posts: 6,853
Received 120 Likes
on
91 Posts
Cruise-In V Veteran
St. Jude's Donor '05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16
We have three kits available for your C6:
1 - Base kit $1500 plus shipping which includes headlight buckets, plug and play harness, bumper panels (2) and fender panels (2), hardware and install guide. This kit will work on ANY C6 model. It will require extensive knowledge in body work and is not a garage install
2 - Base kit with half bumper kit $2000 plus shipping. Includes all of the above but instead of 2 bumper panels you get an entire bumper upper half that includes the Z06 bumper vent. It saves a lot of time on the install which will likely pay for the additional $500 in time and labor savings. Not to mention you’re adding the Z06 vent to even the narrow body cars (which they never made with the bumper vent)
3 - Bumper and fender replacement C67 kit for widebody ONLY $3000 plus freight. You would either be doing the install on your Z06/GS/Zr1 or converting your narrow body over and adding rear quarter panels from a widebody. If you have a widebody car you can usually sell your factory parts and pay for most or all of the $3000. This kit is bolt on, however it will require fit and finishing for paint as would be expected for any quality finished install.
NONE of our kits include C7 headlights. You can often find C7 headlights used for less than the price of used C6 headlights in good condition so the headlight cost usually is not significant once the C6 headlights are out and sold.
1 - Base kit $1500 plus shipping which includes headlight buckets, plug and play harness, bumper panels (2) and fender panels (2), hardware and install guide. This kit will work on ANY C6 model. It will require extensive knowledge in body work and is not a garage install
2 - Base kit with half bumper kit $2000 plus shipping. Includes all of the above but instead of 2 bumper panels you get an entire bumper upper half that includes the Z06 bumper vent. It saves a lot of time on the install which will likely pay for the additional $500 in time and labor savings. Not to mention you’re adding the Z06 vent to even the narrow body cars (which they never made with the bumper vent)
3 - Bumper and fender replacement C67 kit for widebody ONLY $3000 plus freight. You would either be doing the install on your Z06/GS/Zr1 or converting your narrow body over and adding rear quarter panels from a widebody. If you have a widebody car you can usually sell your factory parts and pay for most or all of the $3000. This kit is bolt on, however it will require fit and finishing for paint as would be expected for any quality finished install.
NONE of our kits include C7 headlights. You can often find C7 headlights used for less than the price of used C6 headlights in good condition so the headlight cost usually is not significant once the C6 headlights are out and sold.
#443
buckets
We have three kits available for your C6:
1 - Base kit $1500 plus shipping which includes headlight buckets, plug and play harness, bumper panels (2) and fender panels (2), hardware and install guide. This kit will work on ANY C6 model. It will require extensive knowledge in body work and is not a garage install
2 - Base kit with half bumper kit $2000 plus shipping. Includes all of the above but instead of 2 bumper panels you get an entire bumper upper half that includes the Z06 bumper vent. It saves a lot of time on the install which will likely pay for the additional $500 in time and labor savings. Not to mention you’re adding the Z06 vent to even the narrow body cars (which they never made with the bumper vent)
3 - Bumper and fender replacement C67 kit for widebody ONLY $3000 plus freight. You would either be doing the install on your Z06/GS/Zr1 or converting your narrow body over and adding rear quarter panels from a widebody. If you have a widebody car you can usually sell your factory parts and pay for most or all of the $3000. This kit is bolt on, however it will require fit and finishing for paint as would be expected for any quality finished install.
NONE of our kits include C7 headlights. You can often find C7 headlights used for less than the price of used C6 headlights in good condition so the headlight cost usually is not significant once the C6 headlights are out and sold.
1 - Base kit $1500 plus shipping which includes headlight buckets, plug and play harness, bumper panels (2) and fender panels (2), hardware and install guide. This kit will work on ANY C6 model. It will require extensive knowledge in body work and is not a garage install
2 - Base kit with half bumper kit $2000 plus shipping. Includes all of the above but instead of 2 bumper panels you get an entire bumper upper half that includes the Z06 bumper vent. It saves a lot of time on the install which will likely pay for the additional $500 in time and labor savings. Not to mention you’re adding the Z06 vent to even the narrow body cars (which they never made with the bumper vent)
3 - Bumper and fender replacement C67 kit for widebody ONLY $3000 plus freight. You would either be doing the install on your Z06/GS/Zr1 or converting your narrow body over and adding rear quarter panels from a widebody. If you have a widebody car you can usually sell your factory parts and pay for most or all of the $3000. This kit is bolt on, however it will require fit and finishing for paint as would be expected for any quality finished install.
NONE of our kits include C7 headlights. You can often find C7 headlights used for less than the price of used C6 headlights in good condition so the headlight cost usually is not significant once the C6 headlights are out and sold.
#444
Instructor
#446
yes I put c7 fenders on c6 I had to move the side vent back and do custom fiberglass work to make it fit and also the hood I'm doing rear part now of the car to add c7 parts , if you cant do fiberglass you cant do this its not easy and even wasted lot money of fiberglass to make these work , I may build a mold of all when done but best thing to do is buy his kit already done if you have this done what I did you pay over 25 or more . its lot work and time but yes it can be done but getting all the body lines was the hardest , IM not doing pictures yet I'm waiting till done I plan post in corvette magazine later , but yes can be done but not e a s y
#447
Premium Supporting Vendor
Thread Starter
Member Since: Nov 2003
Location: www.EXOTICVETTE.com - FL Cruise-In VI, VII, & VIII
Posts: 6,853
Received 120 Likes
on
91 Posts
Cruise-In V Veteran
St. Jude's Donor '05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16
Another bumper and fender set on it's way out the door with brand new C7 headlights Congrats James can't wait to see pics of the car when it's done!
Fender and bumper widebody (factory Z06/Zr1/GS width) replacement kit is $3000.
Fender and bumper widebody (factory Z06/Zr1/GS width) replacement kit is $3000.
#448
Premium Supporting Vendor
Thread Starter
Member Since: Nov 2003
Location: www.EXOTICVETTE.com - FL Cruise-In VI, VII, & VIII
Posts: 6,853
Received 120 Likes
on
91 Posts
Cruise-In V Veteran
St. Jude's Donor '05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16
For $3000 you can get the bumper/fender Z06 kit. You can usually sell your OEM Z06 fenders for at least $500 each and the front bumper sells for $600-1000. Basically you’d be paying $1000-1500 for the kit.
C6 Headlights in bad condition bring $400-500 a pair. In good condition they usually bring $800-1200 a pair. I can supply brand new C7 headlights for $1700.
Your car could basically have the new modern C7 look of the C67 with brand new headlights for as little as $1500 plus paint and install. A few guys have purchased the kit and headlights on credit card and sell the original parts after they have been removed during the install.
#449
Premium Supporting Vendor
Thread Starter
Member Since: Nov 2003
Location: www.EXOTICVETTE.com - FL Cruise-In VI, VII, & VIII
Posts: 6,853
Received 120 Likes
on
91 Posts
Cruise-In V Veteran
St. Jude's Donor '05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16
Another Bolt On replacement C67 rear bumper shipping out today. Here is a picture of the one left in stock right now. Includes wiring harness plugs. You can pick up C7 tail lights dirt cheap used from guys who wen twitch Z06 lights. Sell for about $200 a pair used.
C67 rear bumper $1500 plus Frieght or pick it up and save shipping cost!
The following users liked this post:
Kevin Ramey (04-17-2018)
The following users liked this post:
Crazy Cowboy (04-30-2018)
#451
Premium Supporting Vendor
Thread Starter
Member Since: Nov 2003
Location: www.EXOTICVETTE.com - FL Cruise-In VI, VII, & VIII
Posts: 6,853
Received 120 Likes
on
91 Posts
Cruise-In V Veteran
St. Jude's Donor '05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16
I will be closed for two weeks starting Thursday guys but I do have a widebody full fiberglass replacement bumper and full fender replacement kit in stock and ready to go. The kit is $3000 plus shipping (or pickup for no additional charge) and I can also get the headlights brand new OEM C7 for $850 each.
I can get the parts made and out to you from the shop while I’m out. Although build time is generally about 1-2 weeks for kits if I don’t have one in stock.
We just shipped our first ever delivery to Finland for our customer Jatta (yes, a female C6 owner!) who is doing the C67 conversion!!! Hope to have pics when she’s done for you.
Here is the non-widebody conversion which includes the fender panels and the top bumper cap with Z06 vent.
I can get the parts made and out to you from the shop while I’m out. Although build time is generally about 1-2 weeks for kits if I don’t have one in stock.
We just shipped our first ever delivery to Finland for our customer Jatta (yes, a female C6 owner!) who is doing the C67 conversion!!! Hope to have pics when she’s done for you.
Here is the non-widebody conversion which includes the fender panels and the top bumper cap with Z06 vent.
Last edited by Crazy Cowboy; 04-30-2018 at 08:26 AM.
#452
nice
I will be closed for two weeks starting Thursday guys but I do have a widebody full fiberglass replacement bumper and full fender replacement kit in stock and ready to go. The kit is $3000 plus shipping (or pickup for no additional charge) and I can also get the headlights brand new OEM C7 for $850 each.
I can get the parts made and out to you from the shop while I’m out. Although build time is generally about 1-2 weeks for kits if I don’t have one in stock.
We just shipped our first ever delivery to Finland for our customer Jatta (yes, a female C6 owner!) who is doing the C67 conversion!!! Hope to have pics when she’s done for you.
Here is the non-widebody conversion which includes the fender panels and the top bumper cap with Z06 vent.
I can get the parts made and out to you from the shop while I’m out. Although build time is generally about 1-2 weeks for kits if I don’t have one in stock.
We just shipped our first ever delivery to Finland for our customer Jatta (yes, a female C6 owner!) who is doing the C67 conversion!!! Hope to have pics when she’s done for you.
Here is the non-widebody conversion which includes the fender panels and the top bumper cap with Z06 vent.
#453
Pro
Damn nice work. C7 front end with C6 rear end looks good.
The following users liked this post:
Crazy Cowboy (05-03-2018)
#456
Premium Supporting Vendor
Thread Starter
Member Since: Nov 2003
Location: www.EXOTICVETTE.com - FL Cruise-In VI, VII, & VIII
Posts: 6,853
Received 120 Likes
on
91 Posts
Cruise-In V Veteran
St. Jude's Donor '05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16
Let me see what I can come up with for you later tonight. Might have an idea.
#457
Premium Supporting Vendor
Thread Starter
Member Since: Nov 2003
Location: www.EXOTICVETTE.com - FL Cruise-In VI, VII, & VIII
Posts: 6,853
Received 120 Likes
on
91 Posts
Cruise-In V Veteran
St. Jude's Donor '05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16
Two more customer cars completed by the customer's local shops. One has been added to the pics on the C67 ordering page. The other will have pics coming soon.
Order yours now and we can start building it and have it shipped in 1-2 weeks or less.
Order yours now and we can start building it and have it shipped in 1-2 weeks or less.
#458
Safety Car
Member Since: Feb 2001
Location: yardley, pa 19067
Posts: 4,273
Likes: 0
Received 289 Likes
on
160 Posts
Another Bolt On replacement C67 rear bumper shipping out today. Here is a picture of the one left in stock right now. Includes wiring harness plugs. You can pick up C7 tail lights dirt cheap used from guys who wen twitch Z06 lights. Sell for about $200 a pair used.
C67 rear bumper $1500 plus Frieght or pick it up and save shipping cost!
#459
Premium Supporting Vendor
Thread Starter
Member Since: Nov 2003
Location: www.EXOTICVETTE.com - FL Cruise-In VI, VII, & VIII
Posts: 6,853
Received 120 Likes
on
91 Posts
Cruise-In V Veteran
St. Jude's Donor '05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16
Well, beauty is in the eye of the beholder. One thing I've learned in life is you can miss out on a lot of potential opportunities and friendships with negativity - much less towards someone you don't know.... It's amazing what treating everyone with respect can do for your life.
I may be running a sale for the 4th of July on the conversion kits guys I will be out of town doing insulation kit installs up in NY for a few days but we will still be taking and building order. Our fiberglass guy works every day and is always building something.
I may be running a sale for the 4th of July on the conversion kits guys I will be out of town doing insulation kit installs up in NY for a few days but we will still be taking and building order. Our fiberglass guy works every day and is always building something.
#460
Pro
Well, beauty is in the eye of the beholder. One thing I've learned in life is you can miss out on a lot of potential opportunities and friendships with negativity - much less towards someone you don't know.... It's amazing what treating everyone with respect can do for your life.
I may be running a sale for the 4th of July on the conversion kits guys I will be out of town doing insulation kit installs up in NY for a few days but we will still be taking and building order. Our fiberglass guy works every day and is always building something.
I may be running a sale for the 4th of July on the conversion kits guys I will be out of town doing insulation kit installs up in NY for a few days but we will still be taking and building order. Our fiberglass guy works every day and is always building something.
The following users liked this post:
Crazy Cowboy (07-04-2018)