danbo56

Does anyone have a good set of instuctions for the Aviaid Baffle install on a 07 C6Z? Pictures would be even better. I have the LPE tank in place do I need to pull the tank of just the top?

thanks in advance

slief

Try this.. Never heard of them or this.. After I googled it, I see they are (or where) located a couple doors down from my office.. Who'd a thunk it.

wstaab

You will need to pull the tank.
Instructions: http://www.aviaid.com/pdfs/z06-instructions.pdf

Oil pan insert.


Stock windage tray modified to fit.

JDIllon

I assume you mean the Tank baffles? If so, Yes you should pull the tank. Trying to do it from the top will take you longer than pulling the tank. JD

danbo56

thanks fellas! That will get it!

jlutherva

Danbo, did you get what you need? I installed the Aviaid dry sump tank baffle in a 2009 tank for my 07 Z. I can walk you thru it.

Jim

jlvink66

Yes, you will need to pull the tank out to get to all of the screws. Here is a photo from when I did mine. The instructions from Aviaid on installing the baffle in the tank is pretty good;



Dreamin did a great write-up on installing the tank;
http://forums.corvetteforum.com/c6-z...tallation.html

John

dvandentop

wstaab just curious as to why you modified the stock windage tray???

i have read that it is necessary to remove the stock one when using the baffle?? I am working on the install now so any replies appreciated.

thanks

SLandstra_Z06

Derek,

I installed all of those parts when I had the new engine put in my car last month. Also, the Katech hi-flow ported and blueprinted oil pump.

Steve

dvandentop

yep i am going to be using the katech pump, the tank insert, lingenfelter tank and also the pan insert.

just confirmed with John from Aviaid that the stock windage tray is not necessary on the ls7 pan install

SLandstra_Z06

I didn't put the stock windage tray in, but all of the Aviaid sheet metal parts and the tank insert.