Headlight Crazing?
Thread Starter
Burning Brakes
Joined: Apr 2005
Posts: 1,172
Likes: 0
From: Port Labelle Florida
Headlight Crazing?
Whats causing this phenomenom? I have it on my passenger side but not on driver side. Thought it might be protective film I had on lens but it does not seem to be the cause...
And what is the replacement cost for one of these lense assemblies?
And what is the replacement cost for one of these lense assemblies?
Last edited by als2052; Apr 23, 2009 at 11:38 AM.
Le Mans Master
Joined: Oct 2007
Posts: 6,149
Likes: 11
From: Greater Detroit Metro MI, when I'm not travelling.
Yup, it does seem to be the cause
Plenty of people on this forum have reported what you are seeing because ofheadlight films.Expect to pay $800 to $1000+ for a replacement
Supporting Vendor
Joined: Sep 2007
Posts: 11,216
Likes: 178
From: Pensacola Florida GO GATORS!!! www.rlsebring.com www.c6c7vette.com
St. Jude Donor '17
Heat is the main cause of crazing. The sun beating down on the Lexan/acrylic is bad enough but if somebody pushed on the lens while that hot it would look like a spider web.
I am out now but have a few assemblies to take apart and should have a couple of good lens to sell.
230.00 set or 125.00 ea Shipped including paypal.
Advanced
Joined: Jul 2007
Posts: 97
Likes: 0
From: CA
Crazing
I just noticed my '07 passenger side doing this, no film on them and only 4800 miles. They started small, got bigger, then more and more were showing up. Took to dealer, waiting to here back - while searching around on the forum I found a tsb #4624 - FINE CRACKS OR CRAZING ON HEAD LAMP LENS. *NJ
We will see what happens.....
We will see what happens.....
Race Director<br><img src="/forums/images/ranks/7k-10k.gif" border="0">
Joined: Feb 2001
Posts: 13,013
Likes: 26
From: HOME OF THE FREE. BECAUSE OF OUR BRAVE. Babylon NY
St. Jude Donor '06 thru '20
I have 2 M/S headlights in perfect shape. Replaced them with CF lights. If interested pm me.
Fact is some headlights craze others don't. Put the right film on the headlights and no problem.
Fact is some headlights craze others don't. Put the right film on the headlights and no problem.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Advanced
Joined: Jul 2007
Posts: 97
Likes: 0
From: CA
I just noticed my '07 passenger side doing this, no film on them and only 4800 miles. They started small, got bigger, then more and more were showing up. Took to dealer, waiting to here back - while searching around on the forum I found a tsb #4624 - FINE CRACKS OR CRAZING ON HEAD LAMP LENS. *NJ
We will see what happens.....
We will see what happens.....
Well I went by the dealer today (took by there yesterday to have it looked at) and he had already ordered the replacement part and will call when it comes in to install it - needless to say I had a print-out of the TSB with me in case it slipped his mind. Good dealer in my book...
Update:
Got the headlight replaced, had the oil changed as well and the dealer (Hanlees in Davis, Ca) left my car a mess - oily hand prints everywhere inside the car on the door panel and handle, on the hood, etc. Called them on it right away, they had me bring the car back in for a full detail. Got the car back looking showroom new - very nice, I would just like to say that they were outstanding in the way they handled this matter. Thank You Hanlees
Last edited by Shake N Bake; Aug 13, 2009 at 12:19 PM. Reason: update
