New PB
Thread Starter
Melting Slicks
Joined: Nov 2006
Posts: 2,865
Likes: 2
From: Dallas Tx
New PB
This was with a DA of +300, 1.62 60', and letting off before the 1/4 mile b/c there was water on the track causing wheel spin. That is why my damn MPH was only 123.xx. 2 or 3 other vettes ran in the right lane and had the same problem. We told the track and they shut it down to 1/8 mile and then closed the track soon after. But I am getting more used to the clutch finally. See how I can do this coming Sunday.
Last edited by dsp300c; Dec 13, 2009 at 08:04 PM.
Thread Starter
Melting Slicks
Joined: Nov 2006
Posts: 2,865
Likes: 2
From: Dallas Tx
thanks guys...just curious what it would have been if i didn't let out...i will never know...hahaha...that is why there is track day this coming sunday....
waiting on my buddy to send me a link to the video
waiting on my buddy to send me a link to the video
Last edited by dsp300c; Dec 13, 2009 at 09:27 PM.
Team Owner
Joined: Feb 2001
Posts: 27,254
Likes: 136
From: Short Hills, NJ
Good job man, 
the competition/quest for internal mods supremacy is really heating up now! 
Lifting towards the end of the track/near the line really doesn't scrub off nearly as much ET as it does MPH.
You definitely gave up at least some ET by lifting though, that might've been a low 10.6x pass.
the competition/quest for internal mods supremacy is really heating up now! Lifting towards the end of the track/near the line really doesn't scrub off nearly as much ET as it does MPH.
You definitely gave up at least some ET by lifting though, that might've been a low 10.6x pass.
Burning Brakes
Joined: Oct 2008
Posts: 1,021
Likes: 0
From: HOUSTON TEXAS
103 mph in the 1/8....thats smokin..
you had a 10.50 pass going before the lift....good luck next time..what are you making to the rear wheels..475-490's???
Last edited by MLCZ51; Dec 13, 2009 at 09:50 PM.
Thread Starter
Melting Slicks
Joined: Nov 2006
Posts: 2,865
Likes: 2
From: Dallas Tx
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Thread Starter
Melting Slicks
Joined: Nov 2006
Posts: 2,865
Likes: 2
From: Dallas Tx
Le Mans Master
Joined: Oct 2006
Posts: 5,078
Likes: 19
From: Cumming, GA
Racer
Joined: Sep 2008
Posts: 448
Likes: 0
From: West Monroe La. (Fastest Bolt On M6)
10.6 and you let off...holy smokes..That would explain the 123mph..I bet you will hit 10.4's at around 131-132 next time..Seems like you can never get that perfect pass in..Its always something..At least I know with me it is, Anyway..congrats bud on a great time.
Thread Starter
Melting Slicks
Joined: Nov 2006
Posts: 2,865
Likes: 2
From: Dallas Tx
Thanks. I'll post a vid later tonight. Waiting on a buddy to upload it. Sorry about the halfslip. Track is getting cheap and didn't want to give out 2 slips. So they tore them in half. But I have a vid to back up slip. I'll get it to y'all.
Thats what its all about!
Race Director
Joined: Dec 2006
Posts: 12,387
Likes: 2,909
From: Fort Worth, Texas
Hope the weather's better next weekend, as it definitely wasn't ideal yesterday...I know it'll go 10.5s, but if you can get that 60' in the 1.5s I actually believe it could go 10.4! I enjoyed being apart of your record run and have the other half of your timeslip if ya want it!