When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I just bought my 1st C6 Corvette, LS2 2007. I was looking in the trunk and in the left trunk compartment I noticed a Kenny Bell boost pump, and then I opened the glove box and seen a Kenny Bell controller. My car came with a PSC1 procharger. Any help with these 2- items. Thanks Alan
K.B. boost a pump increasing the voltage to the fuel pump, thus increasing fuel flow while under boost. This prevents the engine from going lean at WOT. The boost a pump (BAP) works under boost when needed, without it your engine will lean out, detonate and go kaboom!
Last edited by Mike's LS3; Dec 18, 2016 at 03:20 PM.
K.B. boost a pump increasing the voltage to the fuel pump, thus increasing fuel flow while under boost. This prevents the engine from going lean at WOT. The boost a pump (BAP) works only under boost when needed without it your engine will lean out, detonate and go kaboom!
K.B. boost a pump increasing the voltage to the fuel pump, thus increasing fuel flow while under boost. This prevents the engine from going lean at WOT. The boost a pump (BAP) works under boost when needed, without it your engine will lean out, detonate and go kaboom!
Assuming it doesn't have some other supporting fuel system mods.. which it very well could (well, hopefully anyways).
Last edited by schpenxel; Dec 18, 2016 at 05:27 PM.
K.B. boost a pump increasing the voltage to the fuel pump, thus increasing fuel flow while under boost. This prevents the engine from going lean at WOT. The boost a pump (BAP) works under boost when needed, without it your engine will lean out, detonate and go kaboom!