When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Nick if you make one for an 02 1500 truck can you pm me a price please?
Local competitor is a little too proud of theirs . Everything hook up as factory>
I'm glad I found this thread today because I overheated at my last track day. But that was mostly due to spending 3 laps at redline, 1 cooldown lap later and I was fine.
I know the questions are being beat to death but do you forsee any conflict with this radiator and the UPP twin turbo kit? I just ordered mine and their installation instructions mention notching the radiator for the charge pipe (I see this comes pre cut) and also installing a supplementary radiator bracket that angles the radiator in a little further to make room for their front mount intercooler. from the pictures I imagine it shouldn't be a problem but I didn't know if you saw any issue the increased angle in terms of airflow.
Nick if you make one for an 02 1500 truck can you pm me a price please?
Local competitor is a little too proud of theirs . Everything hook up as factory>
I'm assuming this is for a Silverado/Sierra? In that case we do! Check it out Here
Originally Posted by Shikaitsu
I'm glad I found this thread today because I overheated at my last track day. But that was mostly due to spending 3 laps at redline, 1 cooldown lap later and I was fine.
Originally Posted by Shikaitsu
I know the questions are being beat to death but do you forsee any conflict with this radiator and the UPP twin turbo kit? I just ordered mine and their installation instructions mention notching the radiator for the charge pipe (I see this comes pre cut) and also installing a supplementary radiator bracket that angles the radiator in a little further to make room for their front mount intercooler. from the pictures I imagine it shouldn't be a problem but I didn't know if you saw any issue the increased angle in terms of airflow.
Well, hopefully we can help with that :P
To answer your question, though, yup we specifically included that cutout for the massive intakes (or charge pipes in your case) that are offered for the C6. From the looks of it, you should have no problems with fitting our rad in there with the turbo kit. It's not any taller than the stock design, which is what I noticed was in most of the installed photos I came across. Also, as long as the added angle isn't too drastic, I don't see that affecting it too much either. Granted, there is going to be some reduced airflow to the rad with the intercooler there, but our's should have no issue keeping up!
i just ordered mine. I will be putting it to the test on a lsx ysi 1kwhp c6z build in south Louisiana. See if any improvements can be seen on coolant temps.
i just ordered mine. I will be putting it to the test on a lsx ysi 1kwhp c6z build in south Louisiana. See if any improvements can be seen on coolant temps.
Originally Posted by Shikaitsu
Thanks for the reply! I'll put an order in today and we'll see what happens.
Originally Posted by Shikaitsu
Ordered mine as well. I imagine it'll arrive around the same time as the UPP kit so I'll include some install pics with my build thread.
Awesome! Looking forward to seeing the installed photos!
Originally Posted by gameover4
are these shipping or do they have expected ship dates?
These aren't shipping just yet, but we're aiming to have these out the door by early September! I'll keep you guys in the loop if any of that changes!
Thanks,
Nick
Last edited by Mishimoto; Aug 22, 2018 at 08:56 AM.
wish i could of got mine in intime for my 1/2 mile event coming up. that been a really good test
When is your event? We're looking at next week to have these in stock and start shipping out. I'll keep you guys posted if that moves around any more though!
Originally Posted by theandrewo
Too bad this pre-sale isn't in Spring instead of Fall. I'd be much more likely to buy one with the summer heat on its way!
Never hurts to be prepared for the next summer season, especially since there's still time to get in on the discounted price
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Slideshow: A Jaguar designer's personal project imagines what a modern front-engined Corvette might look like if Chevrolet revisited the golden age of the Stingray.
