Automatic Stuck in Park Fix??
Thread Starter
Advanced
Joined: Aug 2016
Posts: 64
Likes: 8
Automatic Stuck in Park Fix??
So my 07' has always done this. I can just push down that little plastic piece and get it into gear. The problem is it won't go all the way back so I can use the paddle shift (which I love to do since I deleted the exhaust).
What'd the permanent fix to this? A new assembly? Pawl removal? I just want to be able to always use my paddle shift.
TIA.
What'd the permanent fix to this? A new assembly? Pawl removal? I just want to be able to always use my paddle shift.
TIA.
Thread Starter
Advanced
Joined: Aug 2016
Posts: 64
Likes: 8
It's 50/50. Sometimes I start it and it comes right out smooth like it should making all options available. The others it was to be "coerced" out and then it won't go all the way back.
Race Director
Joined: Sep 2009
Posts: 11,351
Likes: 2,445
From: Eastern
It is the locking pawl that is only partially released. It happened to my shifter a few times. It was hard getting out of Park, then it would not go lower than drive, then could not easily get the shifter back into Park.
I tied back the locking pawl, and it has never happened again.
I tied back the locking pawl, and it has never happened again.
Thread Starter
Advanced
Joined: Aug 2016
Posts: 64
Likes: 8
It is the locking pawl that is only partially released. It happened to my shifter a few times. It was hard getting out of Park, then it would not go lower than drive, then could not easily get the shifter back into Park.
I tied back the locking pawl, and it has never happened again.
I tied back the locking pawl, and it has never happened again.
Race Director
Joined: Sep 2009
Posts: 11,351
Likes: 2,445
From: Eastern
Here is a thread which shows the culprit micro-switch that doesn't energize to disengage the locking pawl.
This thread shows how to test the switch.
https://www.corvetteforum.com/forums...e-found-7.html
Tying back the pawl is a sure way to not have to worry about the failing or failed micro switch, but it does also allow the shifter to be moved from Park by just pushing in on the pushbutton. The brake does not have to be applied.
Some have done a modified locking pawl tie back, where they have a wire loop going from the pawl to the console, and only use it if the shifter gets stuck.
Here is how to get at the locking pawl, and micro switch.
This thread shows how to test the switch.
https://www.corvetteforum.com/forums...e-found-7.html
Tying back the pawl is a sure way to not have to worry about the failing or failed micro switch, but it does also allow the shifter to be moved from Park by just pushing in on the pushbutton. The brake does not have to be applied.
Some have done a modified locking pawl tie back, where they have a wire loop going from the pawl to the console, and only use it if the shifter gets stuck.
Here is how to get at the locking pawl, and micro switch.
Thread Starter
Advanced
Joined: Aug 2016
Posts: 64
Likes: 8
Here is a thread which shows the culprit micro-switch that doesn't energize to disengage the locking pawl.
This thread shows how to test the switch.
https://www.corvetteforum.com/forums...e-found-7.html
Tying back the pawl is a sure way to not have to worry about the failing or failed micro switch, but it does also allow the shifter to be moved from Park by just pushing in on the pushbutton. The brake does not have to be applied.
Some have done a modified locking pawl tie back, where they have a wire loop going from the pawl to the console, and only use it if the shifter gets stuck.
Here is how to get at the locking pawl, and micro switch.
This thread shows how to test the switch.
https://www.corvetteforum.com/forums...e-found-7.html
Tying back the pawl is a sure way to not have to worry about the failing or failed micro switch, but it does also allow the shifter to be moved from Park by just pushing in on the pushbutton. The brake does not have to be applied.
Some have done a modified locking pawl tie back, where they have a wire loop going from the pawl to the console, and only use it if the shifter gets stuck.
Here is how to get at the locking pawl, and micro switch.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
