Dry Start
Thread Starter
Racer
Joined: Apr 2012
Posts: 340
Likes: 37
From: Plymouth, Ma
Dry Start
My C6 GS has been sitting since December ‘24. I’ll be starting her soon. Gas has been treated & she’s on a trickle charge, oil & coolant are good. Is the method of: Depressing throttle to floor
Clutch in
Hitting “Start” for 5-7 seconds 4 or 5 times, the best way to go? She’s a convert, so no dry sump
This is my first later model. I’m basically a C1, 2 & 3 guy.
TIA
Clutch in
Hitting “Start” for 5-7 seconds 4 or 5 times, the best way to go? She’s a convert, so no dry sump
This is my first later model. I’m basically a C1, 2 & 3 guy.
TIA
Racer
Joined: Apr 2022
Posts: 491
Likes: 338
From: Syracuse, NY
That method works great, Just hold it wide open... Hit the start button and will crank. If you want you can continue to hold the throttle until it times out and it will stop cranking. I think it will do that after 10-15 seconds. Then you can start it again like normal or even give it another round to endure you are getting the oil moving around
Thread Starter
Racer
Joined: Apr 2012
Posts: 340
Likes: 37
From: Plymouth, Ma
That method works great, Just hold it wide open... Hit the start button and will crank. If you want you can continue to hold the throttle until it times out and it will stop cranking. I think it will do that after 10-15 seconds. Then you can start it again like normal or even give it another round to endure you are getting the oil moving around
Thank you!
