Convertible Sub Section
Now I'm just shopping for a spoiler. This need a wicker bill style imo. Maybe a stage two.





My Carbon Flash Stage Two spoiler, purchased by the original owner, looks really good and has been commented on as one of the more unique styling choices on the car. Your car, your (wife's) choice!
My wife tells me that i like it.
It doesn't have the 2 indentations on the leading edge and also has the bolt holes for the winglets.
That looks like the Stock Z51 spoiler as was already suggested.
I'll have to post a pic after it's installed.
The Best of Corvette for Corvette Enthusiasts
I FINALLY was able to find a dealership willing to perform: https://static.nhtsa.gov/odi/tsbs/20...40403-9999.pdf
Bulletin No.: 17-NA-278
Convertible Top Creak or Snap Noise While Driving
This impacts 2014-2016 Convertibles
Replace 6 current M5 retaining screws with 6 new M6 self threading screws- Part # 11549154
I purchased the 6 screws and tried it myself, but it is way more difficult than it looks.
So I printed out the TSB and provided the new 6 screws, but 3 Chevrolet shops in San Diego refused to do the work. I took it to a convertible specialist (with 25+ years experience), and he said accessing the screws was too tricky for him.
On a whim, I asked Steve Rayman Chevrolet in Atlanta to perform the 17-NA-278 TSB while the car was there for the triple flush.
They said it was a total pain to do, but were able to replace the screws.
WOW- what a difference!!! The top is rock solid and quiet when up. No more creaks, taps, snaps, or other noises.
Highly recommend if any of you guys are having this problem. Keep trying until you find a shop that is willing to do it.
One dealership in California quoted me "a minimum of $250"
So definitely shop around!
I FINALLY was able to find a dealership willing to perform: https://static.nhtsa.gov/odi/tsbs/20...40403-9999.pdf
Bulletin No.: 17-NA-278
Convertible Top Creak or Snap Noise While Driving
This impacts 2014-2016 Convertibles
Replace 6 current M5 retaining screws with 6 new M6 self threading screws- Part # 11549154
I purchased the 6 screws and tried it myself, but it is way more difficult than it looks.
So I printed out the TSB and provided the new 6 screws, but 3 Chevrolet shops in San Diego refused to do the work. I took it to a convertible specialist (with 25+ years experience), and he said accessing the screws was too tricky for him.
On a whim, I asked Steve Rayman Chevrolet in Atlanta to perform the 17-NA-278 TSB while the car was there for the triple flush.
They said it was a total pain to do, but were able to replace the screws.
WOW- what a difference!!! The top is rock solid and quiet when up. No more creaks, taps, snaps, or other noises.
Highly recommend if any of you guys are having this problem. Keep trying until you find a shop that is willing to do it.
Thanks, Mark. Saved your info for future reference. Hope I won't need it!
Now I'm just shopping for a spoiler. This need a wicker bill style imo. Maybe a stage two.
ACS Five 1 Stage 1 bolt-on wicker bill




















