LG/StopTech Big Brake Kit Now Available
#1
Premium Supporting Vendor
Thread Starter
LG/StopTech Big Brake Kit Now Available
For our upcoming Nurburgring trip Lou wanted the "Badass StopTech's" he used in WC, StopTech didn't have a C7 Application but after a little persuasion now they do! Give us a call at 972-429-1963 for more information or to order yours.
STR60GT Six-Piston Front Calipers
-Forged and Weight Optimized for Unsprung Weight Reduction
-Stiffest Caliper Available with Patented Strengthening Bridge for improved Pedal Feel & Modulation
-Eliminates Pad Taper Wear and Provides Consistent Performance
380mm x 32mm Wide Annulus Aero Rotors
STR41 Four-Piston Rear Calipers
-Forged and Weight Optimized for Unsprung Weight Reduction
-Stiffest Caliper Available with Patented Strengthening Bridge for improved Pedal Feel & Modulation
-Eliminates Pad Taper Wear and Provides Consistent Performance
380mm x 32mm Standard Annulus Aero Rotors
STR60GT Six-Piston Front Calipers
-Forged and Weight Optimized for Unsprung Weight Reduction
-Stiffest Caliper Available with Patented Strengthening Bridge for improved Pedal Feel & Modulation
-Eliminates Pad Taper Wear and Provides Consistent Performance
380mm x 32mm Wide Annulus Aero Rotors
STR41 Four-Piston Rear Calipers
-Forged and Weight Optimized for Unsprung Weight Reduction
-Stiffest Caliper Available with Patented Strengthening Bridge for improved Pedal Feel & Modulation
-Eliminates Pad Taper Wear and Provides Consistent Performance
380mm x 32mm Standard Annulus Aero Rotors
The following 2 users liked this post by Dane@LGmotorsports:
Mikec7z (08-21-2018),
Z51VetteFan (05-17-2019)
#2
Melting Slicks
Member Since: Feb 2009
Location: Dallas Georgia
Posts: 2,787
Received 594 Likes
on
408 Posts
2020 Corvette of the Year Finalist (track prepared)
C3 of Year Winner (track prepared) 2019
Any particular reason you guys went with Stoptech instead of AP or Alcon? If I didn't already have a BBK on my car, I would certainly consider these, but am also really happy with the AP radi-cal set up.
#3
Premium Supporting Vendor
Thread Starter
Lou might follow up and say I'm crazy but I think he liked the AP's on the white car, but wanted to go with something that he'd beaten the heck out of on a racetrack and knew from experience would hold up.
The following users liked this post:
fleming23 (06-22-2018)
#4
Pro
I got to check these out today. They are light for how huge they are.
You cant really tell form the picture above but they are vented all the way through around the pistons which I though was a cool (I made a pun) feature.
Also, got to check out the car that's going to Nürburgring... looking bad azz.
You cant really tell form the picture above but they are vented all the way through around the pistons which I though was a cool (I made a pun) feature.
Also, got to check out the car that's going to Nürburgring... looking bad azz.
The following users liked this post:
Fernando@LGMotorsports (06-26-2018)
#5
Premium Supporting Vendor
Thread Starter
I got to check these out today. They are light for how huge they are.
You cant really tell form the picture above but they are vented all the way through around the pistons which I though was a cool (I made a pun) feature.
Also, got to check out the car that's going to Nürburgring... looking bad azz.
You cant really tell form the picture above but they are vented all the way through around the pistons which I though was a cool (I made a pun) feature.
Also, got to check out the car that's going to Nürburgring... looking bad azz.
#6
Former Vendor
Member Since: Sep 2016
Location: Westminster California
Posts: 2,557
Received 329 Likes
on
225 Posts
For our upcoming Nurburgring trip Lou wanted the "Badass StopTech's" he used in WC, StopTech didn't have a C7 Application but after a little persuasion now they do! Give us a call at 972-429-1963 for more information or to order yours.
STR60GT Six-Piston Front Calipers
-Forged and Weight Optimized for Unsprung Weight Reduction
-Stiffest Caliper Available with Patented Strengthening Bridge for improved Pedal Feel & Modulation
-Eliminates Pad Taper Wear and Provides Consistent Performance
380mm x 32mm Wide Annulus Aero Rotors
STR41 Four-Piston Rear Calipers
-Forged and Weight Optimized for Unsprung Weight Reduction
-Stiffest Caliper Available with Patented Strengthening Bridge for improved Pedal Feel & Modulation
-Eliminates Pad Taper Wear and Provides Consistent Performance
380mm x 32mm Standard Annulus Aero Rotors
STR60GT Six-Piston Front Calipers
-Forged and Weight Optimized for Unsprung Weight Reduction
-Stiffest Caliper Available with Patented Strengthening Bridge for improved Pedal Feel & Modulation
-Eliminates Pad Taper Wear and Provides Consistent Performance
380mm x 32mm Wide Annulus Aero Rotors
STR41 Four-Piston Rear Calipers
-Forged and Weight Optimized for Unsprung Weight Reduction
-Stiffest Caliper Available with Patented Strengthening Bridge for improved Pedal Feel & Modulation
-Eliminates Pad Taper Wear and Provides Consistent Performance
380mm x 32mm Standard Annulus Aero Rotors
#7
Premium Supporting Vendor
Thread Starter
#8
Premium Supporting Vendor
Thread Starter
Almost finished with the Install!
Last edited by Dane@LGmotorsports; 06-26-2018 at 01:48 PM.
The following users liked this post:
Deicide (06-26-2018)
#9
Premium Supporting Vendor
Thread Starter
Update!
We have four kits in final inspection/assembly that will be in stock shortly. We will give preferred pricing to these first four purchasers and the next production run will not occur until after we go for a time at Nurburgring in October.
Be first, save $ and skip the wait. Or just sit in the middle of the pack and follow the leaders
Give us a call at 972-429-1963 for more info, or to order
We have four kits in final inspection/assembly that will be in stock shortly. We will give preferred pricing to these first four purchasers and the next production run will not occur until after we go for a time at Nurburgring in October.
Be first, save $ and skip the wait. Or just sit in the middle of the pack and follow the leaders
Give us a call at 972-429-1963 for more info, or to order
#11
Premium Supporting Vendor
Thread Starter
The following users liked this post:
wildgoat (08-21-2018)
#13
Premium Supporting Vendor
Thread Starter
21 days left for preferred pricing!
#14
Premium Supporting Vendor
Thread Starter
Saw a significant improvement in pad life based on Nurburgring. PFC 13 compound pads had 75% left when the car was loaded up. Lou said the kit was amazing on track.
The following users liked this post:
Deicide (11-06-2018)
#15
Melting Slicks
What is the weight difference on this Stoptech kit vs the j57 and j56 Brake’s?
#16
Premium Supporting Vendor
Thread Starter
#17
Sr.Random input generator
Edit
380x32 Wide Annulus
Left: https://www.zeckhausen.com/catalog/p...ducts_id=17054
Right: https://www.zeckhausen.com/catalog/p...ducts_id=17055
These are MSRP; you can often find them for cheaper.
Last edited by X25; 05-15-2019 at 05:01 PM.
#18
Premium Supporting Vendor
Thread Starter
Were you able to find your weight data? I'm guessing the rotors might be a bit heavy due to wide annulus, but it'd definitely be worth it for extra braking capabilities. What pads and replacement rotors does this kit use? If we were to get the kit, it'd be very important to be able to find replacement parts for cheap. The pad is mentioned as 1" thick; is it the same ST60 pad, but just 1" thick? I can also find the 380x32 wide annulus StopTech rotors. Here's hoping these would be what this kit comes with, and nothing custom : )
Edit
380x32 Wide Annulus
Left: https://www.zeckhausen.com/catalog/p...ducts_id=17054
Right: https://www.zeckhausen.com/catalog/p...ducts_id=17055
These are MSRP; you can often find them for cheaper.
Edit
380x32 Wide Annulus
Left: https://www.zeckhausen.com/catalog/p...ducts_id=17054
Right: https://www.zeckhausen.com/catalog/p...ducts_id=17055
These are MSRP; you can often find them for cheaper.
Those are the correct replacement rotors. The pads are actually a brembo endurance pad shape so it's readily available. We ran PFC 7799.13.25.44 front and PFC 0345.11.17.44 rear.
#19
Sr.Random input generator
Those are the most expensive pads I've ever seen!
So, from the part numbers, looks like the rears are 17mm thick; good to know.
So, from the part numbers, looks like the rears are 17mm thick; good to know.
#20
Premium Supporting Vendor
Thread Starter
Yeah it caught me off guard when I ordered them. I think we have some back up Cobalts around here somewhere I'll have to see what the part numbers on those are.