Especially with the Cartek kit!
line locks
Thread Starter
Instructor
Joined: Oct 2004
Posts: 209
Likes: 1
From: Fords NJ
line locks
I have a question for those of you who have line locks on your ZO6. Do you have any trouble with your ABS light coming on when you use your line locks, or have any issues with it? How many different types of line locks are available and which one is the better one to get? any info would be great. thanks
Le Mans Master
Joined: May 2003
Posts: 6,937
Likes: 3
From: Orange County California
Originally Posted by algZO6
Abs light does com on for a few seconds but then every thing is ok. cartek is the way to go if you are in the market. good luck. 
Are they easy to install? I want to put one on mine.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Team Owner
Joined: Aug 2003
Posts: 38,314
Likes: 35
The Cartek kit is easy to install and IMO the best bet as everything is already bent to the correct angle, flaring, flanges and bolts are already done and to the correct length. Cost a bit more but well worth it.
Last edited by '06 Quicksilver Z06; Mar 21, 2005 at 11:44 PM.
Thread Starter
Instructor
Joined: Oct 2004
Posts: 209
Likes: 1
From: Fords NJ
Originally Posted by mdhmi
Local performance shop. I asked them to match an online price and they agreed.
Mark
Mark
Team Owner
Joined: Oct 2001
Posts: 46,766
Likes: 5
From: Boynton Beach Florida
St. Jude Donor '07-'12, '20
Originally Posted by Yellow03ZO6
i was reading the instructions on the hurst line lock and it says it is not recomended for cars with abs
Burning Brakes
Joined: Mar 2002
Posts: 1,176
Likes: 0
From: highland village texas
RPM (Lewisville TX) installed my line-lock and put the switch under the shifter boot on back plate...can't see a thing...just take hand from shifter straight down and hold button etc etc....really clean and totally out of sight.
Team Owner
Joined: Oct 2001
Posts: 46,766
Likes: 5
From: Boynton Beach Florida
St. Jude Donor '07-'12, '20
Originally Posted by Yellow03ZO6
thanks for the info i just wanted to double check, im having it installed tomorrow morning
As you can see by the above posts, I think we have all the manufacturers accounted for. 
Enjoy the new burnout ability 
Melting Slicks
Joined: Apr 2002
Posts: 2,683
Likes: 0
Anymore have some instructions for installing the Hurst unit on a C5?? I put one in YEARS ago on my old '89 Stang.... pretty easy/straight forward, sure would be nice if the same could be said of a Vette install. 