CorvetteForum - Chevrolet Corvette Forum Discussion
Insert your tool on the outside of the contact (lug) and push down as you push the wire up. Can be tough to do with only 2 hands. You can feel when the tool slides past the tab on the lug.
Insert your tool on the outside of the contact (lug) and push down as you push the wire up. Can be tough to do with only 2 hands. You can feel when the tool slides past the tab on the lug.
0 2019/03/28 03:50:42
I use a piece of flat metal as a tool Scrap that I saved from something??? About 1/8" wide and .010" thick.
I use a piece of flat metal as a tool Scrap that I saved from something??? About 1/8" wide and .010" thick.
0 2019/03/28 03:49:03
Looking at the end of the connector - see the small slot on the outside of each contact (lug)
Looking at the end of the connector - see the small slot on the outside of each contact (lug)
0 2019/03/28 03:46:59
0 2019/03/18 15:44:56
0 2019/03/18 15:44:47
096 longer than others
096 longer than others
0 2019/03/07 08:20:47
096 - 60 - 62 Chevy maybe.
096 - 60 - 62 Chevy maybe.
0 2019/03/07 08:19:48
122 & 184 64 - 65 Chevy I think.
122 & 184 64 - 65 Chevy I think.
0 2019/03/07 08:19:23
175 Has a ground bracket for something?
175 Has a ground bracket for something?
0 2019/03/07 08:18:32
164 Fan contactor on reostat 68 Chevy
164 Fan contactor on reostat 68 Chevy
0 2019/03/07 08:18:14
164, 175, 122, 184, 096
164, 175, 122, 184, 096
0 2019/03/07 08:16:15
I know they are all original Chevy, but don't know what. If you want one, I'll put a bulb in it to make sure it is good.
I know they are all original Chevy, but don't know what. If you want one, I'll put a bulb in it to make sure it is good.
0 2019/02/23 16:19:37
68 Camaro light is at the top left. Others I don't know.
68 Camaro light is at the top left. Others I don't know.
0 2019/02/23 16:19:20
0 2019/02/23 07:33:27
0 2019/02/23 07:33:18
0 2019/01/26 09:06:12
0 2019/01/26 09:04:38
0 2019/01/26 08:55:12
0 2019/01/26 08:55:00
0 2019/01/22 16:36:52
0 2019/01/22 16:36:47
0 2019/01/22 16:34:59
0 2019/01/22 16:34:47
Can't seem to get a clear shot - sorry.
Can't seem to get a clear shot - sorry.
0 2019/01/10 19:08:09
Very good shape for 50+ year old labels
Very good shape for 50+ year old labels
0 2019/01/10 19:06:23
0 2019/01/08 05:55:09
Found the reinforcement would not seat in the inside of the new old pulley. Left it out.
Found the reinforcement would not seat in the inside of the new old pulley. Left it out.
0 2019/01/08 05:54:58
Found an old pulley that is 1/8” deeper and got it cleaned and painted.
Found an old pulley that is 1/8” deeper and got it cleaned and painted.
0 2019/01/08 05:54:36
Cleaned and painted everything (pump, pulley, fan, etc.) up for reassembly. Put the new pump on to trial fit it and found the pulley did not align well with the crank pulley. Put the new and old pumps on the bench and found the shaft on the new pump is about 3/32” further out than the old Townada pump. The new Made in China pump rocked on the bench as the mating surfaces appear to not be square. I had already painted it, so returning it would be starting all over and they didn’t have anymore in
Cleaned and painted everything (pump, pulley, fan, etc.) up for reassembly. Put the new pump on to trial fit it and found the pulley did not align well with the crank pulley. Put the new and old pumps on the bench and found the shaft on the new pump is about 3/32” further out than the old Townada pump. The new Made in China pump rocked on the bench as the mating surfaces appear to not be square. I had already painted it, so returning it would be starting all over and they didn’t have anymore in
0 2019/01/08 05:54:21
Tight fit limiting alternator adjustment
Tight fit limiting alternator adjustment
0 2019/01/08 05:07:46
Broken brush holder
Broken brush holder
0 2019/01/08 05:07:08
0 2018/12/30 08:36:00
0 2018/12/19 15:37:13
0 2018/12/13 08:32:17
0 2018/12/13 08:30:30
0 2018/12/13 08:30:06
0 2018/12/13 08:29:46
0 2018/12/13 08:29:31
0 2018/12/04 14:27:51
0 2018/12/04 14:26:35