CorvetteForum - Chevrolet Corvette Forum Discussion
Little more than a thick hair.
Little more than a thick hair.
0 2024/05/17 12:57:44
Note there is still a bit of clearance between the vacuum can and the intake runner.
Note there is still a bit of clearance between the vacuum can and the intake runner.
0 2024/05/05 18:25:19
No backpressure here!!! Bout' 12" diameter
No backpressure here!!! Bout' 12" diameter
0 2024/05/04 19:01:27
You will have to enlarge it to see the script.
You will have to enlarge it to see the script.
0 2024/05/03 18:50:11
Small box about 4" x 12" x 1-1/2" holds the tools.
Small box about 4" x 12" x 1-1/2" holds the tools.
0 2024/04/29 18:48:09
There is a spring under the contact washer. The contact washer has two tabs that align with notches in the plastic rotator on the lever shaft to actuate the lights.
There is a spring under the contact washer. The contact washer has two tabs that align with notches in the plastic rotator on the lever shaft to actuate the lights.
0 2024/04/22 13:19:18
The contacts were oxidized after 56 years even though the switch was filled with oil.
The contacts were oxidized after 56 years even though the switch was filled with oil.
0 2024/04/22 13:19:09
Muddy day at Tri-State.
Muddy day at Tri-State.
0 2024/04/02 09:33:11
Incorrect alignment, ~ 180 degrees out.
Incorrect alignment, ~ 180 degrees out.
0 2024/03/24 06:45:51
Correct alignment
Correct alignment
0 2024/03/24 06:45:18
The original carburetor for your car - Carter 500cfm AFB. Has the small air horn.
The original carburetor for your car - Carter 500cfm AFB. Has the small air horn.
0 2024/03/18 11:46:52
68RS valve covers with Chrysler breather and PCV valve installed. Also Edelbrock 600cfm AFB carburetor. I know it is real dirty.
68RS valve covers with Chrysler breather and PCV valve installed. Also Edelbrock 600cfm AFB carburetor. I know it is real dirty.
0 2024/03/18 11:43:07
0 2024/02/29 11:45:34
0 2024/02/29 11:43:13
64 and 69 date coded alternators
64 and 69 date coded alternators
0 2024/02/26 07:54:15
Alternator on R66
Alternator on R66
0 2024/02/26 07:53:54
0 2024/02/25 18:28:37
CHEAP
CHEAP
0 2024/02/25 14:33:48
The opening is to the radiator, not to cool air!!!
The opening is to the radiator, not to cool air!!!
0 2024/02/20 18:24:56
Cover for Hole. Not taped on yet.
Cover for Hole. Not taped on yet.
0 2024/02/20 14:41:36
What's the hole for????
What's the hole for????
0 2024/02/20 14:41:16
0 2024/02/19 18:43:16
Just put in my adjusting cover for reference
Just put in my adjusting cover for reference
0 2024/02/19 18:42:22
I shortened the arm to reduce leverage on the magnet mount.
I shortened the arm to reduce leverage on the magnet mount.
0 2024/02/17 07:26:47
I removed the suction cup and added a magnet from HF to secure it to the speaker grille.
I removed the suction cup and added a magnet from HF to secure it to the speaker grille.
0 2024/02/17 07:26:17
Might be original, but haven't had the car since new.
Might be original, but haven't had the car since new.
0 2024/02/01 06:19:12
Switch with bulb holder / socket in place.
Switch with bulb holder / socket in place.
0 2024/01/22 18:26:15
Original 066 switch
Original 066 switch
0 2024/01/22 18:26:02
68RS with M/T Valve covers with no internal baffles. Added the Baffle can with PCV valve.
68RS with M/T Valve covers with no internal baffles. Added the Baffle can with PCV valve.
0 2024/01/17 07:12:17
Edelbrock used to make breathers with wool baffle. I cut the old valve cover to use adjusting valves.
Edelbrock used to make breathers with wool baffle. I cut the old valve cover to use adjusting valves.
0 2024/01/17 06:39:03
Chrysler style can baffles available at parts stores of some vendors. These cans are filled with a metal wool to separate the liquid from the vapors.
Chrysler style can baffles available at parts stores of some vendors. These cans are filled with a metal wool to separate the liquid from the vapors.
0 2024/01/17 06:37:48
VC baffle - not much baffle, but worked.
VC baffle - not much baffle, but worked.
0 2024/01/17 06:37:07
VC baffle fits between rocker arms / valves
VC baffle fits between rocker arms / valves
0 2024/01/17 06:36:21
Chevy Internal valve cover baffle
Chevy Internal valve cover baffle
0 2024/01/17 06:35:57
0 2024/01/09 04:02:59
0 2024/01/05 13:12:41
1968 connector with a single bolt to hold the assembly tight. Also dielectric grease from the factory. Not sure about 67 vehicles
1968 connector with a single bolt to hold the assembly tight. Also dielectric grease from the factory. Not sure about 67 vehicles
0 2023/12/14 07:27:28
Early 60s style connector housing with male pawl and female loop.
Early 60s style connector housing with male pawl and female loop.
0 2023/12/14 07:26:15
0 2023/12/14 07:25:15
0 2023/12/11 05:59:55