CorvetteForum - Chevrolet Corvette Forum Discussion
Under car passager side, behind body mount which is behind the passager front wheel.
Under car passager side, behind body mount which is behind the passager front wheel.
0 2019/06/22 05:22:52
0 2019/06/10 09:52:21
0 2019/06/05 04:34:55
This from my tag the other two pictures are from Al Grenning / Toy Sinor corvette trim tag book. Dave
This from my tag the other two pictures are from Al Grenning / Toy Sinor corvette trim tag book. Dave
0 2019/05/28 15:29:27
0 2019/05/28 15:28:33
0 2019/05/28 15:26:44
0 2019/05/27 14:02:11
0 2019/05/27 14:00:18
0 2019/05/27 13:59:37
0 2019/05/27 13:43:45
0 2019/05/27 13:43:11
0 2019/05/27 13:40:05
0 2019/05/27 13:25:23
0 2019/05/25 06:55:24
Is this what you are looking for? Sold by Paragon Corvette Reproductions. Dave
Is this what you are looking for? Sold by Paragon Corvette Reproductions. Dave
0 2019/05/25 06:50:08
0 2019/05/24 15:22:41
0 2019/05/24 15:20:48
0 2019/05/24 15:19:20
0 2019/05/24 13:55:01
0 2019/05/24 13:53:06
0 2019/05/24 13:50:55
This intake was on my '65 when i got the car. Casting # 3844459 Date G193 july-19-63 Would this be used on a '63 or '64 model year car? Any chance this is original to my nov-7-64 built car? (G.M strike sept-26-64 to nov-6-64).
This intake was on my '65 when i got the car. Casting # 3844459 Date G193 july-19-63 Would this be used on a '63 or '64 model year car? Any chance this is original to my nov-7-64 built car? (G.M strike sept-26-64 to nov-6-64).
0 2019/03/25 17:41:34
0 2019/02/14 06:21:37
0 2019/02/14 06:19:55
0 2018/09/27 06:11:27
0 2018/09/27 06:09:57
0 2018/09/27 06:07:36
0 2018/07/31 11:46:47
Comp said I can run stock rockers. Anyone have a part number for long slot rockers for a 1965 327 with 462 heads & flat top pistons. I currently have comp roller tip rockers that are very noisy. I would like to try some stock type rockers to see if they make less noise.
Comp said I can run stock rockers. Anyone have a part number for long slot rockers for a 1965 327 with 462 heads & flat top pistons. I currently have comp roller tip rockers that are very noisy. I would like to try some stock type rockers to see if they make less noise.
0 2018/07/31 11:30:15
1965 327 with 462 heads and flat top pistons
1965 327 with 462 heads and flat top pistons
0 2018/07/31 10:55:12
0 2018/07/31 10:54:16
This is my dash sticker. Anyone know what the different cluster numbers indicate? Mine is # 6455363.
This is my dash sticker. Anyone know what the different cluster numbers indicate? Mine is # 6455363.
0 2018/05/22 10:14:16
0 2018/05/22 10:12:34
After taking a closer look I think both levers can be used on both sides. I flipped over the silver one and it seems to be working in my bench test.
After taking a closer look I think both levers can be used on both sides. I flipped over the silver one and it seems to be working in my bench test.
0 2018/04/16 06:43:16
After taking a closer look I think you could install both levers either way. I flipped over the silver one and it seems to be working in my bench test.
After taking a closer look I think you could install both levers either way. I flipped over the silver one and it seems to be working in my bench test.
0 2018/04/16 06:31:55
After taking a closer look at the two levers I have, I think you could use both sides of either lever. I flipped the silver one over and it seems to work fine when bench testing.
After taking a closer look at the two levers I have, I think you could use both sides of either lever. I flipped the silver one over and it seems to work fine when bench testing.
0 2018/04/16 06:25:27
0 2018/04/14 09:12:30
0 2018/04/14 09:11:19
0 2018/04/14 09:10:42
0 2018/04/14 09:09:01