Step 1 1. Remove the upper stabilizer bolt and the lower stabilizer nut. Remove stabilizer bar from mount and swing down. Tools required: 18mm socket, 15mm wrench Step 2 2. Remove the muffler support brackets. Tools required: 13mm socket with extension Step 3 3. Remove the 4 bolts that attach the left and right muffler […]

While waiting for my car to be serviced (oil/filter change), I noticed a Red 99 or 00 C5 (6-Speed )coming in on a flat-bed tow truck. As I suspected it was being transported to the dealership for a Column Lock failure. The tow drive unloaded the locked up car right in front of me and […]

The following procedure will give you a new code that you can use instead of your personal code. Using this new code, you can �unlock� your radio and then �re-lock� it with a new code if you wish. Prerequisites: The radio must be in LOC mode NOT in INOP mode. Let me explain. If you […]

Tools required- torx drivers (#15) metric sockets & driver (7, 10 mm) phillips screwdriver 1) remove the center console cover by removing the 4 phillips screws that attach it to its hinge 2) remove the plastic covers at the back of the console area to expose the nuts securing the back part of the console […]