C2 Archives - Page 122 of 124 - CorvetteForum

Category: C2

Breathing Easy: 1CoolC2’s Gorgeous Custom Intake!

There are plenty of classics which look like the last stop on their assembly line was a time machine. And without question, they’re gorgeous. But properly fusing past and present can be even trickier and 1CoolC2 has totally pulled it off with his ’67 C2. In addition to swapping the original mill for an LS7, […] More »

By: | August 5, 2011


Tragic Sinking: ’62 Vette Rolls Into a Connecticut Pond!

We all know Corvettes are named after a “speedy ship” and we also know they make pretty lousy boats. Just ask Mark Weiss who watched helplessly Thursday evening as his classic 1962 Corvette rolled down an embankment and submerged in Mead Pond in New Canaan, CT.
According to Weiss, he was

By: | August 2, 2011


Vintage Racing: C2 Rips Up the Track in Japan!

Modern racing is great, but the opportunity to see vintage iron mixing it up has its own thrills. Sure, the competition isn’t quite as fierce, because these machines aren’t as replaceable as their modern counterparts. And nobody wants to see a classic thoroughbred stuffed into the fence! This footage was shot at an inter-club race […] More »

By: | August 1, 2011



Breaking the Bank: $600K 1967 Corvette 427 on eBay!

Given the price, this baby might need a little TLC. The eBay ad claims this example is the only ‘Vette of this vintage with Ermine White/Saddle Leather, radio delete, and most importantly, the potent 435HP L71. The seller is the original owner, and the beefy big block has seen a scant 35,344 miles. Also, the […] More »

By: | July 29, 2011


The C2 Corvette: A Legend in the Making

  The 1963 and 1964 C2 Corvettes all had 327 cu. in. engines. This standard engine produced 250 horsepower (186 kW). Optional modifications, including fuel injection, produced up to 375 horsepower or 280 kW. In 1965, the standard engine was the 396 cu. in. ?big block? V-8, which produced 425 horsepower or 317 kW. For […] More »

By: | April 19, 2011


C2 Corvette: How to change the brake pads

Changing your own brake pads is an easier job than many people think and a job like this is a simple way to save money.  To do your own brake job you will need the following items: -A floor jack -Jackstands -Wheel wrench -Large pliers -A socket set and ratchet -Light sand paper -Small hammer […] More »

By: | August 24, 2010


C2 Corvette: How to change the oil

Changing the oil on your C2 Corvette is relatively easy. All you need are the items listed below, plus about an hour’s time and a little patience, especially if you haven’t done the job before.

By: | July 9, 2010



All times are GMT -4. The time now is 05:35 PM.