1972 pro touring build
Thread Starter
Advanced
Joined: Aug 2018
Posts: 64
Likes: 46
From: Richmond Virginia
Yes I used 3m panel bond to mount the flares then I used fiberglass resin and mat then some tiger hair witch is basically fiberglass filler and now I am using body filler to smooth out the glass then I will start priming with polyester primer and blocking with 180 then a final prime with 2k primer and block with 320 and t go over it all with a DA and a foam pad with 600
Thread Starter
Advanced
Joined: Aug 2018
Posts: 64
Likes: 46
From: Richmond Virginia
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Safety Car
Joined: Nov 2005
Posts: 3,961
Likes: 573
From: Lompoc, CA. Santa Barbara County
Great work. Thanks for sharing. Did that stock power steering pulley work. I had to go to a much smaller Dingo. Since you have power steering, you might consider Hydroboost for brake assistance, one of my top ten mods. Will this be a driver, or racer, or show car?
Bee Jay
Bee Jay
Thread Starter
Advanced
Joined: Aug 2018
Posts: 64
Likes: 46
From: Richmond Virginia
Great work. Thanks for sharing. Did that stock power steering pulley work. I had to go to a much smaller Dingo. Since you have power steering, you might consider Hydroboost for brake assistance, one of my top ten mods. Will this be a driver, or racer, or show car?
Bee Jay
Bee Jay
Melting Slicks
Joined: Jul 2010
Posts: 3,176
Likes: 633
From: perth western australia
Looking great for sure .
I know your feeling great now , that's a huge milestone in a build , especially with so much body work .
orange will look great on those big flares when you get some wheels under it
I know your feeling great now , that's a huge milestone in a build , especially with so much body work .
orange will look great on those big flares when you get some wheels under it
Thread Starter
Advanced
Joined: Aug 2018
Posts: 64
Likes: 46
From: Richmond Virginia
