Ill get it back next week with a 2k stall
c4 383/blower build
Race Director
Joined: Aug 2006
Posts: 18,346
Likes: 1
From: D / FW
Every Wed 7 pm ! A lot of awesome vettes come out ! I often joke there is enough H P in this parking lot to drag Rosa's down the highway ! 
There is a group that Drag Race at Crandall but as I work out of town and often go to TXR for Test and Tune I don't get out there as often as I would like .
Gad I went over on SW to get this link cause I am putting electric exhaust cutouts on my 3 in custom exhaust and there is a thread about exhaust shops there !
There is a group that Drag Race at Crandall but as I work out of town and often go to TXR for Test and Tune I don't get out there as often as I would like .
Gad I went over on SW to get this link cause I am putting electric exhaust cutouts on my 3 in custom exhaust and there is a thread about exhaust shops there !
Race Director
Joined: Aug 2006
Posts: 18,346
Likes: 1
From: D / FW
Every Wed 7 pm ! A lot of awesome vettes come out ! I often joke there is enough H P in this parking lot to drag Rosa's down the highway !
There is a group that Drag Race at Crandall but as I work out of town and often go to TXR for Test and Tune I don't get out there as often as I would like .
Glad I went over on SW to get this link cause I am putting electric exhaust cutouts on my 3 in custom exhaust and there is a thread about exhaust shops there !
http://forums.corvetteforum.com/sout...ing-areas.html
There is a group that Drag Race at Crandall but as I work out of town and often go to TXR for Test and Tune I don't get out there as often as I would like .
Glad I went over on SW to get this link cause I am putting electric exhaust cutouts on my 3 in custom exhaust and there is a thread about exhaust shops there !
http://forums.corvetteforum.com/sout...ing-areas.html
Last edited by larry00; Apr 15, 2010 at 09:08 PM.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
Thread Starter
Instructor
Joined: Mar 2010
Posts: 169
Likes: 0
From: YellowBullet.com TX
got the trans built, was testing and tuning the air to fuel gage wast working for one. everything was good till i bumped the timing up to 32 degz. did a little launch down the road started miss n and blow n radiator fluid out the exhaust. think it was lean .
the next ones will be FORGED! also the motor wasnt built for a blower. 9.5 to 1
the next ones will be FORGED! also the motor wasnt built for a blower. 9.5 to 1
Last edited by lucster; May 27, 2010 at 11:11 PM.
Thread Starter
Instructor
Joined: Mar 2010
Posts: 169
Likes: 0
From: YellowBullet.com TX
well its on again, was installing new pistons noticed it cracked the block as well, so got reman 383 block from summit, forged dished, comp cam XR288HR.
Hope i get it all back together in a couple of weeks
Hope i get it all back together in a couple of weeks
