Project Roll Cage
Drifting
Joined: Aug 2001
Posts: 1,500
Likes: 0
From: Holliston MA
Cruise-In VII Veteran
Re: Project Roll Cage (90qzrblu)
Are you gonna put a roll cage in the Rolls-Royce too? :cheers:
It's in the shop for some restoration work.
Melting Slicks
Joined: May 2000
Posts: 2,148
Likes: 1
From: Chandler AZ
Re: (L98Terror)
So you're sure the rear bars won't just fold in half with all those bends???
Wondering why you brought them in so far at the top; mounting them more on the vertical part of the main hoop would've reduced bend angles substantially.
Wondering why you brought them in so far at the top; mounting them more on the vertical part of the main hoop would've reduced bend angles substantially.
Drifting
Joined: Aug 2001
Posts: 1,500
Likes: 0
From: Holliston MA
Cruise-In VII Veteran
Re: (gcrouse)
So you're sure the rear bars won't just fold in half with all those bends???
Wondering why you brought them in so far at the top; mounting them more on the vertical part of the main hoop would've reduced bend angles substantially.
Wondering why you brought them in so far at the top; mounting them more on the vertical part of the main hoop would've reduced bend angles substantially.
[Modified by SloRvette, 7:05 AM 4/6/2002]
[Modified by SloRvette, 7:18 AM 4/6/2002]
Thread Starter
Race Director
Joined: May 1999
Posts: 14,267
Likes: 1
From: Plymouth MI Formerly Milford, MA MI
W. Detroit Events Coordinator
Cruise-In VI Veteran
Cruise-In VII Veteran
Cruise-In VII Autocross Champ
Re: Project Roll Cage (NoWorries)
Good night another 21 hr day, I'll be up in 2 1/2 hour to goto NHIS
Thread Starter
Race Director
Joined: May 1999
Posts: 14,267
Likes: 1
From: Plymouth MI Formerly Milford, MA MI
W. Detroit Events Coordinator
Cruise-In VI Veteran
Cruise-In VII Veteran
Cruise-In VII Autocross Champ
Re: Project Roll Cage (L98Terror)
Back from NHIS
Check out http://forums.corvetteforum.com/zerothread?id=273702
http://forums.corvetteforum.com/zerothread?id=273703
Any ways we finished stage one of the Roll cage Friday night, After getting two top[ straps for my harness from Paul's house, changing my oil and packing I hit the sack at 3:15 AM was up for 5:30 on the road for 6:15. Barly made it to NHIS in time but it all worked out great. The four point is all welded in and ready to go we stiull need to get the two front bars done and get the interior back in.
This really adds to the Character of the Vette. Here are some more photos, enjoy
Fitting the Harness
Mmmmm Dinner
It fits
Check out http://forums.corvetteforum.com/zerothread?id=273702
http://forums.corvetteforum.com/zerothread?id=273703
Any ways we finished stage one of the Roll cage Friday night, After getting two top[ straps for my harness from Paul's house, changing my oil and packing I hit the sack at 3:15 AM was up for 5:30 on the road for 6:15. Barly made it to NHIS in time but it all worked out great. The four point is all welded in and ready to go we stiull need to get the two front bars done and get the interior back in.
This really adds to the Character of the Vette. Here are some more photos, enjoy
Fitting the Harness
Mmmmm Dinner
It fits
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Team Owner
Joined: Nov 1999
Posts: 32,782
Likes: 11
From: Former NCM Drag Racing coordinator, National director Corvette Challenge Spring Hill, Tennessee: Whiting, New Jersey
Cruise-In VI Veteran
Cruise-In VII Veteran
Re: Project Roll Cage (Patrick96LT4)
This is so fun to watch.
It's one of the most interesting posts in a while....
It's one of the most interesting posts in a while....
Thread Starter
Race Director
Joined: May 1999
Posts: 14,267
Likes: 1
From: Plymouth MI Formerly Milford, MA MI
W. Detroit Events Coordinator
Cruise-In VI Veteran
Cruise-In VII Veteran
Cruise-In VII Autocross Champ
Re: Project Roll Cage (Patrick96LT4)
Well the update is this, I'll went to the track on Sat & Sun for some Road racing. Ended up going home Sat night after some great laps. No brakes Boiled them one to many times, oil leak which I haven't found yet and I developed a miss:( After not being home for 7 day I needed to get caught up with work and home life. I'll post some more updates as we move forward. Keep in mind I'm working 65-70 hrs a week and trying to squeese this in.
Sat I'm doing Kevin's exhaust and doing a GS brake upgrade for Mr Magoo
I'll keep posting
Sat I'm doing Kevin's exhaust and doing a GS brake upgrade for Mr Magoo
I'll keep posting
Le Mans Master
Joined: Aug 2000
Posts: 6,503
Likes: 0
Re: (scorp508)
Ken, let me know if you need any help during the week. I'll put off tearing mine down to help fix yours.
:jester
Thread Starter
Race Director
Joined: May 1999
Posts: 14,267
Likes: 1
From: Plymouth MI Formerly Milford, MA MI
W. Detroit Events Coordinator
Cruise-In VI Veteran
Cruise-In VII Veteran
Cruise-In VII Autocross Champ
Re: (1996man)
Thanks for the offers as you know you can always come over and drink a beer :cheers:
Thread Starter
Race Director
Joined: May 1999
Posts: 14,267
Likes: 1
From: Plymouth MI Formerly Milford, MA MI
W. Detroit Events Coordinator
Cruise-In VI Veteran
Cruise-In VII Veteran
Cruise-In VII Autocross Champ
Re: (scorp508)
Thanks for the offers as you know you can always come over and drink a beer :cheers:
Anytime. Gimme a call about Thu when you know more. I put the new cam in today. :)
Anytime. Gimme a call about Thu when you know more. I put the new cam in today. :)