Notices
C5 General General C5 Corvette and C5 Z06 Discussion not covered in Tech

Corbeau A4 Install (Holy CRAP !!!)

Thread Tools
 
Search this Thread
 
Old Dec 2, 2013 | 11:37 AM
  #301  
robert miller's Avatar
robert miller
Team Owner
15 Year Member
Active Streak: 30 Days
Active Streak: 60 Days
Photoriffic
 
Joined: Jan 2007
Posts: 29,065
Likes: 1,839
From: cookeville tennessee
Default

Originally Posted by cessna10
How hard are they to install and what about seat movement
Go back and read he has put up a ton of info on your question here.
Reply
Old Dec 2, 2013 | 11:53 AM
  #302  
Toque's Avatar
Toque
Thread Starter
Tech Contributor
20 Year Member
Liked
Loved
Community Favorite
 
Joined: Jan 2004
Posts: 20,030
Likes: 289
From: Wylie TX --> Less is More, except under the hood !
Default

Post brought back from the dead ! ! !





Originally Posted by cessna10
How hard are they to install and what about seat movement
I have a procedure on my web site on the install.
Its super easy.

www.ToqueZ06.com

Define what your asking about seat movement ?
It moved forward/back, and the back tilts back/forward.
It does not have the rocking C5 seat issue...

Toque
Reply
Old Dec 11, 2013 | 12:04 PM
  #303  
66dts-v's Avatar
66dts-v
Drifting
 
Joined: Jan 2012
Posts: 1,883
Likes: 76
From: Portland OR
Default

I wanted to run the wides, but I am still looking at options. There are a few really good seats out there, but there is also a lot of garbage. My *** is picky

I was looking at these:



I can't decide, but I am rebuilding the driver seat this weekend regardless.
Reply
Old Dec 11, 2013 | 12:38 PM
  #304  
MAJ_Charlie's Avatar
MAJ_Charlie
Pro
Supporting Member
10 Year Member
Photogenic
Liked
Loved
 
Joined: Apr 2013
Posts: 749
Likes: 56
From: Northern VA
Default

Originally Posted by 66dts-v
I wanted to run the wides, but I am still looking at options. There are a few really good seats out there, but there is also a lot of garbage. My *** is picky

I was looking at these:



I can't decide, but I am rebuilding the driver seat this weekend regardless.
I actually have this brand in my other car. I have the full leather version. They support my big *** (not at the point where I get out of the car and it says "THANK YOU") so they're Did a drive from DC to Daytona back in March. No comfort issues at all.
Reply
Old Dec 11, 2013 | 01:09 PM
  #305  
Pfadt Racing's Avatar
Pfadt Racing
Safety Car
 
Joined: Dec 2009
Posts: 3,724
Likes: 9
Default

Originally Posted by CPT_Charlie
I actually have this brand in my other car. I have the full leather version. They support my big *** (not at the point where I get out of the car and it says "THANK YOU") so they're Did a drive from DC to Daytona back in March. No comfort issues at all.
Who makes this seat?



Pfadt Race Engineering
888-972-2464
info@pfadtracing.com

Reply
Old Dec 11, 2013 | 01:16 PM
  #306  
trj3's Avatar
trj3
Racer
10 Year Member
Conversation Starter
All Eyes On Me
Photogenic
 
Joined: Sep 2013
Posts: 454
Likes: 27
Default

Do the A4s work well on the track. It would be great to have a DD seat instead of changing them back and forth all the time....
Reply
Old Dec 11, 2013 | 01:34 PM
  #307  
66dts-v's Avatar
66dts-v
Drifting
 
Joined: Jan 2012
Posts: 1,883
Likes: 76
From: Portland OR
Default

Originally Posted by CPT_Charlie
I actually have this brand in my other car. I have the full leather version. They support my big *** (not at the point where I get out of the car and it says "THANK YOU") so they're Did a drive from DC to Daytona back in March. No comfort issues at all.
I'm not as big as I used to be, but I am 6'4" and about 225 with a 36" waist. The full leather looked like a different seat (the harness holes and adjustments).

There is a tuner shop here that has a few knock off seats, but they don't look or feel as good as the Corbeau or Bride. Here's a pic from the craigslist add.



Originally Posted by CL Ad
We have Recaro / Sparco style seats in stock starting at $300 a pair, with rails (your own base is required).
There is a set of S2000 seats on CL, too. But blue leather, no thanks.
Reply
Old Dec 11, 2013 | 01:35 PM
  #308  
66dts-v's Avatar
66dts-v
Drifting
 
Joined: Jan 2012
Posts: 1,883
Likes: 76
From: Portland OR
Default

Originally Posted by Pfadt Racing
Who makes this seat?



Pfadt Race Engineering
888-972-2464
info@pfadtracing.com

Here's where I got the pic. The link was off another seat thread on here.

http://www.madracingconcepts.com/Sea...s.htm#brackets
Reply
Corvette Stories

The Best of Corvette for Corvette Enthusiasts

story-0

5 Best & 5 Most Overrated Corvette Track Packages of All Time!

 Joe Kucinski
story-1

Every 2027 Corvette Engine Explained

 Joe Kucinski
story-2

Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette

 Verdad Gallardo
story-3

10 Ugly Corvettes That We Still Kinda Love

 Joe Kucinski
story-4

Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer

 Brett Foote
story-5

10 Things Every Corvette Owner Needs (2026 Edition)

 Michael S. Palmer
story-6

8 Most "Only Corvette Owners Understand" Quirks and Problems

 Pouria Savadkouei
story-7

10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years

 Joe Kucinski
story-8

How Much Horsepower Every Corvette Engine "LOST" in 1972

 Joe Kucinski
story-9

Top 10 DOs and DON'Ts for Protecting Your Convertible Top!

 Michael S. Palmer
Old Dec 11, 2013 | 02:28 PM
  #309  
Pfadt Racing's Avatar
Pfadt Racing
Safety Car
 
Joined: Dec 2009
Posts: 3,724
Likes: 9
Default

Thanks!
Reply
Old Dec 11, 2013 | 03:13 PM
  #310  
Mr.TT's Avatar
Mr.TT
Melting Slicks
15 Year Member
 
Joined: Dec 2007
Posts: 3,371
Likes: 5
From: Mission Viejo, CA
St. Jude Donor '10, '15-'16
Default

Originally Posted by trj3
Do the A4s work well on the track. It would be great to have a DD seat instead of changing them back and forth all the time....
They are adequate on the track. At the end of the day they are a sport seat not a race seat. If I had a full time track car I would not have A4s. However, I have a street car that sees the track occasionally and for that the A4s are perfect.

Note, I was running 3 point belts as well, if you ran a harness + A4 I'm sure it'd be plenty for even a pretty high level driver.
Reply
Old Dec 11, 2013 | 09:33 PM
  #311  
MAJ_Charlie's Avatar
MAJ_Charlie
Pro
Supporting Member
10 Year Member
Photogenic
Liked
Loved
 
Joined: Apr 2013
Posts: 749
Likes: 56
From: Northern VA
Default

Originally Posted by Pfadt Racing
Who makes this seat?



Pfadt Race Engineering
888-972-2464
info@pfadtracing.com

http://www.madracingconcepts.com/Seats/seats.htm
Reply
Old Dec 11, 2013 | 09:38 PM
  #312  
MAJ_Charlie's Avatar
MAJ_Charlie
Pro
Supporting Member
10 Year Member
Photogenic
Liked
Loved
 
Joined: Apr 2013
Posts: 749
Likes: 56
From: Northern VA
Default

http://www.madracingconcepts.com/Seats/seats.htm

Here's what the look like in my other sportster. I'm strongly considering replacing the factory seats in my Vette with their tan leather seats.
Attached Images     
Reply
Old Dec 11, 2013 | 10:37 PM
  #313  
Cedarberry's Avatar
Cedarberry
Drifting
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Oct 2012
Posts: 1,585
Likes: 28
From: Cedaredge Colorado
Default

By chance is it possible to get the black leather A4s with red stitching. I'm sold on these seats due to this thread, just read from start to finish. Be ordering this week, thought maybe in the past two years they ought have the red stitch option
Reply
Old Dec 12, 2013 | 11:40 AM
  #314  
66dts-v's Avatar
66dts-v
Drifting
 
Joined: Jan 2012
Posts: 1,883
Likes: 76
From: Portland OR
Default

Originally Posted by CPT_Charlie
http://www.madracingconcepts.com/Seats/seats.htm

Here's what the look like in my other sportster. I'm strongly considering replacing the factory seats in my Vette with their tan leather seats.
The black seat with fiberglass back pictured is a replica Cobra Misano seat that doesn't seem to be available anymore. The real seat is $1200 each.

The hunt continues. I am rebuilding my drivers seat this weekend, but I'd love to get seats before spring driving.
Reply
Old Dec 12, 2013 | 11:46 AM
  #315  
Pfadt Racing's Avatar
Pfadt Racing
Safety Car
 
Joined: Dec 2009
Posts: 3,724
Likes: 9
Default

That's too bad, one of our employees here was looking for an inexpensive seat option for track days. Time to give Mike@TPS a ring for some Corbeau's I suppose
Reply
Old Dec 12, 2013 | 12:03 PM
  #316  
66dts-v's Avatar
66dts-v
Drifting
 
Joined: Jan 2012
Posts: 1,883
Likes: 76
From: Portland OR
Default

Originally Posted by Pfadt Racing
That's too bad, one of our employees here was looking for an inexpensive seat option for track days. Time to give Mike@TPS a ring for some Corbeau's I suppose
Yup, sounds like it for me, too.
Reply
Old Dec 12, 2013 | 02:33 PM
  #317  
TPSMak's Avatar
TPSMak
Supporting Vendor
15 Year Member
Liked
Loved
Community Favorite
 
Joined: Nov 2007
Posts: 31,299
Likes: 335
From: San Jose CA
St. Jude Donor '11
Default

Originally Posted by 66dts-v



I can't decide, but I am rebuilding the driver seat this weekend regardless.
We used to sell a brand called Cipher Auto and their cheaper seats were REAL cheap and would not last more than a year. We had alot of issues with the reclining mechanism which is a safety issue. We stopped selling them.

Originally Posted by Pfadt Racing
That's too bad, one of our employees here was looking for an inexpensive seat option for track days. Time to give Mike@TPS a ring for some Corbeau's I suppose
The ONLY reclining seat that will fit the C5 is the Corbeau A4... no other seat is a direct bolt in that will fit easily.
__________________
TPSMotorsports.com
Mike Mak
2705 Lafayette Street
Santa Clara, CA 95050
Phone #: 408/898-4632
Email #: MikeM@TPSMotorsports.com
Authorized dealer of Corbeau Seats, ECS Superchargers, Edelbrock SuperChargers, A&A Superchargers, Kooks, Whipple, Magnalow, Corsa, Borla. LG Motorsports, Procharger, Billy Boat Exhaust, AWE Exhaust, American Racing, TPS Brake Rotors/ Kits, Stainless Steel Brake Lines & much more...



Reply

Get notified of new replies

To Corbeau A4 Install (Holy CRAP !!!)

Old Dec 12, 2013 | 03:12 PM
  #318  
66dts-v's Avatar
66dts-v
Drifting
 
Joined: Jan 2012
Posts: 1,883
Likes: 76
From: Portland OR
Default

Originally Posted by TPSMak
We used to sell a brand called Cipher Auto and their cheaper seats were REAL cheap and would not last more than a year. We had alot of issues with the reclining mechanism which is a safety issue. We stopped selling them.



The ONLY reclining seat that will fit the C5 is the Corbeau A4... no other seat is a direct bolt in that will fit easily.
As much as I love the look of those Cobra knockoffs and some of the Cipher seats look nice, I just looked and a set of A4's with heat is still under $1000. I would rather spend a grand now and be happy than a few hundred a couple times until I found something that works.
Reply
Old Dec 12, 2013 | 03:51 PM
  #319  
TPSMak's Avatar
TPSMak
Supporting Vendor
15 Year Member
Liked
Loved
Community Favorite
 
Joined: Nov 2007
Posts: 31,299
Likes: 335
From: San Jose CA
St. Jude Donor '11
Default

Originally Posted by 66dts-v
As much as I love the look of those Cobra knockoffs and some of the Cipher seats look nice, I just looked and a set of A4's with heat is still under $1000. I would rather spend a grand now and be happy than a few hundred a couple times until I found something that works.
The Cipher seats won't fit a C5 any ways... they are too wide.
Reply
Old Dec 12, 2013 | 03:56 PM
  #320  
66dts-v's Avatar
66dts-v
Drifting
 
Joined: Jan 2012
Posts: 1,883
Likes: 76
From: Portland OR
Default

I was thinking these CPA1016 SERIES (seem to be the same as the A4)

Reply



All times are GMT -4. The time now is 04:57 AM.

story-0
5 Best & 5 Most Overrated Corvette Track Packages of All Time!

Slideshow: The 5 best and 5 most overrated Corvette track packages ever.

By Joe Kucinski | 2026-06-09 12:46:45


VIEW MORE
story-1
Every 2027 Corvette Engine Explained

Slideshow: Every 2027 Corvette engine explained

By Joe Kucinski | 2026-06-09 12:16:31


VIEW MORE
story-2
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette

Slideshow: A Jaguar designer's personal project imagines what a modern front-engined Corvette might look like if Chevrolet revisited the golden age of the Stingray.

By Verdad Gallardo | 2026-06-08 19:53:43


VIEW MORE
story-3
10 Ugly Corvettes That We Still Kinda Love

Slideshow: 10 ugly Corvettes that we still kinda love.

By Joe Kucinski | 2026-06-03 10:34:17


VIEW MORE
story-4
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer

A lot of money has changed hands at the online auction house over the years.

By Brett Foote | 2026-06-03 10:21:50


VIEW MORE
story-5
10 Things Every Corvette Owner Needs (2026 Edition)

Slideshow: 10 great gifts Corvette enthusiasts actually want for Father's Day!

By Michael S. Palmer | 2026-06-03 15:43:40


VIEW MORE
story-6
8 Most "Only Corvette Owners Understand" Quirks and Problems

Slideshow: These are the quirks, annoyances, and oddly lovable problems that every Corvette owner eventually learns to live with.

By Pouria Savadkouei | 2026-05-28 09:31:39


VIEW MORE
story-7
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years

Slideshow: 10 reasons why the C6 Z06 is still a performance benchmark after 20 years.

By Joe Kucinski | 2026-05-27 17:20:09


VIEW MORE
story-8
How Much Horsepower Every Corvette Engine "LOST" in 1972

Slideshow: How much horsepower every Corvette engine lost in 1972.

By Joe Kucinski | 2026-05-27 16:54:53


VIEW MORE
story-9
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!

Slideshow: How to Protect A Convertible Top: 10 DOs & DON'Ts

By Michael S. Palmer | 2026-04-03 00:00:00


VIEW MORE