[Z06] Power antenna FRC vs Conv.
05-03-2010, 03:27 AM
#3
Racer
Thread Starter
05-03-2010, 06:18 AM
#4
Drifting
No difference...........
Who says they are not the same?
I've installed four GM power antenna into FRC/Z06es. This is the kit I usedhttp://www.ecklers.com/product.asp?p...dept%5Fid=1424
Here is a copy of the install instructions:http://content.madirect.com/pdf/607083.pdf
The kits are the same from both Eckler's and Mid America but I think Mid America was cheaper.
Only difference was I installed a switch in the power lead so the anntena would not go up when the CD player is used.
I've installed four GM power antenna into FRC/Z06es. This is the kit I usedhttp://www.ecklers.com/product.asp?p...dept%5Fid=1424
Here is a copy of the install instructions:http://content.madirect.com/pdf/607083.pdf
The kits are the same from both Eckler's and Mid America but I think Mid America was cheaper.
Only difference was I installed a switch in the power lead so the anntena would not go up when the CD player is used.
Last edited by dieseldave56; 05-03-2010 at 06:28 AM. Reason: add links
05-03-2010, 11:13 AM
#5
Racer
Thread Starter
Hi,
thanx for links but please have a look here : http://www.mamotorworks.com/corvette?frame=2.9152
One is for FRC (Z06) and the other for Convertible (even if no longer available)
The only visual difference looks to be the bracket and additional wiring.
I also found :
http://www.parts123.com/parts123/yb....Z5Z5Z500000509
http://www.parts123.com/parts123/yb....Z5Z5Z500000509
[http://www.gmpartshouseusa.com/partl...layCatalogid=0
Do you have a GM part number ?
Thanks
mimi
thanx for links but please have a look here : http://www.mamotorworks.com/corvette?frame=2.9152
One is for FRC (Z06) and the other for Convertible (even if no longer available)
The only visual difference looks to be the bracket and additional wiring.
I also found :
http://www.parts123.com/parts123/yb....Z5Z5Z500000509
http://www.parts123.com/parts123/yb....Z5Z5Z500000509
[http://www.gmpartshouseusa.com/partl...layCatalogid=0
Do you have a GM part number ?
Thanks
mimi
Last edited by jmz06; 05-03-2010 at 11:22 AM.
05-03-2010, 04:38 PM
#7
Drifting
05-04-2010, 12:11 PM
#8
Racer
Thread Starter
05-04-2010, 12:24 PM
#9
Drifting
Yup.
You can even buy a switch to defeat the auto deployment, but when I swapped out the radio it has that option built in.
http://www.mamotorworks.com/corvette-2-308-9152.html
The mounting bracket anchor and the ant wiring (DUH) are already in the car., but you have to run the trigger and power & ground (big deal) to the box under the carpet and a ground.
Install is DUCK SOUP.
You just have to remove a taillight or two.
You can even buy a switch to defeat the auto deployment, but when I swapped out the radio it has that option built in.
http://www.mamotorworks.com/corvette-2-308-9152.html
The mounting bracket anchor and the ant wiring (DUH) are already in the car., but you have to run the trigger and power & ground (big deal) to the box under the carpet and a ground.
Install is DUCK SOUP.
You just have to remove a taillight or two.
Last edited by heavymetals; 05-04-2010 at 12:30 PM.
